DILO气体分析仪C4-3-039R-R501技术参数
Technical data | |
Dimensions (W x H x D) | 538 x 269 x 406 mm |
Weight | 25 kg |
Inlet pressure pe | 0.2 - 35 bar |
Operating temperature | -10 to +50 °C |
Ambient moisture | max. 90 % relative moisture, non condensing |
Operating voltage | 85 - 264 V AC |
Frequency | 47 - 63 Hz |
Number of max. measured values to be stored | 500 |
Interface | USB / LAN / WiFi |
Measuring time | max. 7 min variable calculated by the system |
Protection class | IP65 (device closed) / IP20 (device opened) |
Measuring principle of mol.-% sensor in CO2 or N2 | Non-dispersive infrared sensor (NDIR) (C4-FN) |
Measuring range mol.-% sensor in CO2 or N2 | 0 - 10 mol % (C4-FN) |
Measuring accuracy mol.-% sensor in CO2 or N2 | ≤ 0.1 mol % at < 7% (C4-FN) |
Measuring accuracy mol.-% sensor in CO2 or N2 | ≤ 0.2 mol % at ≥ 7% (C4-FN) |
Measuring principle of moisture sensor | Electronic dew point measurement (capacitive)(C4-FN) |
Measuring range of moisture sensor | -60 to +20 °C (C4-FN) |
Measuring accuracy of moisture sensor | ≤ ± 2 °C °C (at > −40 °C ) (C4-FN) |
Measuring accuracy of moisture sensor | ≤ ± 3 °C °C (at < −40 °C ) (C4-FN) |
Measuring principle mol.-% O2 sensor | Electrochemical reaction (C4-FN) |
Measuring range mol.-% O2 sensor | 0 - 25 mol % (C4-FN) |
Measuring accuracy mol.-% O2 sensor | ≤ ± 0.2 % mol % (C4-FN) |
Measuring principle mol.-% CO2 sensor | Non-dispersive infrared sensor (NDIR) (C4-FN) |
Measuring range mol.-% CO2 sensor | 0 – 100 mol % (C4-FN) |
Measuring accuracy mol.-% CO2 sensor | ≤ ± 2 mol % (C4-FN) |
Measuring principle concentration CO sensor | Electrochemical reaction (C4-FN) |
Measuring accuracy concentration CO sensor | 0 – 500 ppm (C4-FN) |
Measuring accuracy concentration CO sensor | ≤ ± 2 % of measuring range (C4-FN) |
DILO气体分析仪C4-3-039R-R501产品介绍
凭借其创新的设备,MultiAnalyser C4 满足了用户的要求,开机后即可立即运行。 高质量的制造和符合人体工程学的设计保证了紧凑型、易于维护且测量精度高的测量设备的质量标准。 这种多功能测量设备仅用一个样品即可无排放地测定多达五个测量参数。 根据单个设备配置,可以确定集成传感器的值。 由于易于拆卸的集成电池,运输法规不再是问题。 现场可更换电化学传感器具有很大的优势,因为该设备在更换后可以立即使用,无需任何停机时间。
MultiAnalyser C4 允许采用不同的操作方法来无排放地处理被测气体。 一方面将被测气体送入装置内部储存,送入外置气瓶或外置排气收集袋; 对于不抽回气体的连续测量,建议将气体收集在外部排放气体收集袋中。 另一方面,将气体泵回到外部气缸、容器或气室中,压力高达 10 bar pe。 此外,可以使用 MultiAnalyser C4、DILO 服务推车或压缩机装置清空外部袋子。
该测量设备通过 7" 触摸屏提供自动化操作。可以通过 WiFi 通过智能手机、平板电脑或笔记本电脑等移动终端设备进行操作和交换数据。自动显示电化学传感器的剩余寿命。集成到 手推车,可以安全舒适地运输测量设备。现代控制技术与多语言用户友好界面相结合,使设备操作简单方便。
With its innovative equipment, the MultiAnalyser C4 perfectly meets the user’s requirements and is ready for operation immediately after switching on. High-quality manufacture and ergonomic design guarantee the quality standards for a compact and maintenance-friendly measuring device with high measuring accuracy. This multi-functional measuring device allows the emission-free determination of up to five measuring parameters with only one sample. Depending on the individual device configuration, values of the integrated sensors can be determined. Thanks to the easy-to-remove integrated battery, transport regulations are no longer an issue. Our field-replaceable electrochemical sensors offer a great benefit as the device is ready for use immediately after replacement without any down times.
The MultiAnalyser C4 allows different methods of operation for emission-free handling of the measured gas. On the one hand the internal storage of the measured gas into the device, into an external cylinder or an external discharge gas collecting bag; for continuous measurements without pumping the gas back it is recommended to collect the gas in an external discharge gas collecting bag. On the other hand pumping the gas back into an external cylinder, vessel or gas compartment up to 10 bar pe. Furthermore, the external bag can be emptied by using the MultiAnalyser C4, a DILO service cart or compressor unit.
The measuring device offers automated operation via a 7" touch screen. It is possible to operate and exchange data by means of mobile end devices such as smartphones, tablets or laptops via WiFi. The remaining lifetime of the electrochemical sensors is automatically displayed. Integrated into a trolley, the measuring device can be transported in a safe and comfortable way. Modern control technology in conjunction with a user-friendly interface in several languages make device operation simple and convenient.
DILO气体分析仪C4系列其他常用型号:
DILO C4-3-039R-R101
DILO C4-3-039R-R201
DILO C4-3-039R-R301
DILO C4-3-039R-R501
DILO Gas Analyzer NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年,定位于向制造工业提供高端制造技术和设备。代理经营世界优质的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。
如果有任何关于DILO气体分析仪C4-3-039R-R501的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。
If you have any question for DILO products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.
DILO气体分析仪C4-3-039R-R501技术参数及介绍
纳分析仪
热切换仪丨热分析仪
谐波分析仪
PH计丨PH(ORP) (REDOX)传感器丨ORP测定仪
表面/界面性能测定仪
测厚仪
测量计量仪器
尺寸检测仪
充电板监测器
磁导率测试仪
磁通计丨高斯计
电导率分析仪
电工仪器仪表
电化学分析仪器
吨位监测仪
二氧化硅分析仪丨硅表
反射率仪丨反射计丨折光计丨折光率仪
光谱分析仪
光学仪器
函数信号发生器
环境监测仪器
混凝土测定仪
检漏仪
静电检测装置
雷达发生器
粒度丨颗粒丨粉末分析仪器及配件
粒子计数器丨粒子收集器
流量仪表
露点仪
螺纹检测仪
浓度检测仪
其他分析仪配件
气体分析仪丨气体检测仪丨气体探测仪
气相色谱仪丨配件
去离子单元
燃烧测定仪丨燃烧分析仪
色谱分析仪
示波器
数据记录仪丨图形记录器
水分测定仪丨配件
水质分析仪
探针/探针配套
温度仪表丨测温仪表
无损检测丨探伤仪器
物位/液位仪表
显示仪表
校验仪表
校验装置及仪表
行业专用仪器
压力仪表
盐度分析仪
氧分析仪(纯水)
元素分析仪器
质谱分析仪
浊度计