CLEANCONTROLLING粒子捕集器VDA系列介绍

CleanControlling 的颗粒捕集器是 VDA 19.2“装配技术清洁度 - 环境、后勤、人员和装配设施”的进一步发展，用于检测装配环境、进料和加工区域中某些颗粒相关位置的颗粒污染或颗粒体积。

颗粒捕集器的位置可以在环境清洁度/安装环境内、组装过程的进料区域中的局部环境以及直接组装区域中。设置注意事项应代表与未受保护的感兴趣组件相关的粒子相关位置。

可以沿着大厅网格找到进一步的安装方面，以进行室内监控、调查用于表征粒子源的流程、车道、存储区域、锁定区域等。

水平放置的粘合垫吸收颗粒并使其沉淀。粘合垫是均匀的，没有光泽，没有颗粒预加载。粘合垫在激活前配有保护膜。粒子捕集器具有可拆卸的安装选项和标签卡。盖子关闭，在失活后保护沉淀的颗粒。

暴露时间为 7-10 天。

可以进行补充的立体显微镜评估，评估中包括从定义的颗粒尺寸中颗粒的数量和大小，以及分为闪亮的金属颗粒、非闪亮的颗粒和纤维。

可以通过清洁度或沉降数（也称为 Illig 值）来补充评估。将各个颗粒尺寸类别的分析结果（颗粒尺寸分布）乘以加权因子，并将加权的颗粒数相加。由于较大颗粒的权重较高，因此需要考虑不断增加的损坏潜力。将得到的总和值标准化为 1000 cm² 的面积，并与 1 小时的测量时间相关。结果就是所谓的沉降数。使用沉降数的优点是，通过统一的参考变量可以比较沉降结果。通过将结果压缩为每个测量点一个数字，可以更好地记录结果并更轻松地进行比较，即使跨部门和工厂也是如此，尽管会丢失细节。

沉降数的通常极限值在洁净室中为 <50，在发动机洁净室中为 <200，在发动机装配中为 <400。根据组件规范允许的最大颗粒尺寸等于组件生产环境洁净度允许的最大沉降数（通常程序）。

CleanControlling's Particle Trap is a further development of the VDA 19.2 "Technical Cleanliness in Assembly - Environment, Logistics, Personnel and Assembly Facilities" Particle contamination or to observe the particle volume at certain particle-relevant locations in the assembly environment, feed and process areas.

The locations of the particulate trap may be within the environmental cleanliness / mounting environment, the local environment in the feed area of the assembly process, as well as in the immediate assembly area. The setup considerations should represent particle-relevant locations with respect to the unprotected component of interest.

Further installation aspects can be found along a hall grid for performing an indoor monitoring, investigation of processes for the characterization of particle sources, driveways, storage areas, lock areas, etc.

The horizontaly placed adhesive pad absorbs the particles and sediments them. The adhesive pad is homogeneous, not shiny and without particle pre-loading. The adhesive pad is provided with a protective film before activation. The particle trap has a removable mounting option and a labeling card. A lid closes and protects the sedimented particles after deactivation.

The exposure time is 7-10 days.

A supplementary, stereomicroscopic evaluation with the number and size of the particles from a defined particle size as well as a division into shiny metallic particles, non-shiny particles and fibers is possible.

The evaluation can be supplemented by means of a cleanliness or sedimentation number (also called Illig value). The analysis result (particle size distribution) in the individual particle size classes is multiplied by a weighting factor and the weighted particle numbers are summed up. Due to the higher weighting of the larger particles, the growing damage potential is taken into account. The resulting sum value is normalized to an area of 1000 cm² and related to a measuring time of 1 h. The result is the so-called sedimentation number. The use of the sedimentation number has the advantage that the sedimentation results by a unified reference variables is comparable. By compressing the results to one number per measuring point, the results can be better documented and compared more easily, even across divisions and plants, although details are lost.

The usual limit values of the sedimentation number are <50 in cleanroom, <200 in engine cleanroom and <400 in engine assembly. The maximum permissible particle size according to the component specification equals the maximum permissible sedimentation number for ambient cleanliness for component production (usual procedure).

CLEANCONTROLLING粒子捕集器VDA系列其他常用型号：

CLEANCONTROLLING 30001-10

CLEANCONTROLLING 30001-100

CLEANCONTROLLING 30001

CLEANCONTROLLING 30023

CLEANCONTROLLING 30043

CLEANCONTROLLING 3006818

CLEANCONTROLLING 30005

CLEANCONTROLLING PARTICLE TRAP NEW + ORIGINAL+ ONE YEAR WARRANTY

爱泽工业成立于2010年，定位于向制造工业提供高端制造技术和设备。代理经营世界优质的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。

如果有任何关于CLEANCONTROLLING粒子捕集器30001-10的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。

If you have any question for CLEANCONTROLLING products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.

CLEANCONTROLLING粒子捕集器VDA系列30001-10产品介绍

• CLEANCONTROLLING粒子捕集器30001-10
• CLEANCONTROLLING粒子捕集器支架30012