CAREL变频器PSD10354T0介绍

CAREL变频器介绍

Power+ is a drive designed to control compressors with sensorlessbrushless permanent magnet (PM) motors (BLDC/BLAC) or asynchronous induction motors. The drives can also be used in some applications with fans and pumps, and consequently the device off ers fl exible use in the airconditioning and refrigeration sectors. It is fi tted for panel installation or with heat sink outside of the panel. Confi guration and programming, as well as the Run/stop controls and speed reference, are managed by a CAREL pCO controller or any controller device via RS485 serial connection using the Modbus® protocol in master mode.

Functions and main features

In summary:

• compact dimensions for assembly in electrical panels;

• operation at ambient temperatures from -20 to 60°C;

• can be installed in residential and industrial environments;

• connection via serial network to Master programmable controller;

• network address can be confi gured by setting the dipswitches inside to

the drive;

• can control various types of compressors;

• safety digital input (Safety Torque Off ) when provided;

• dedicated input for PTC thermistor or thermostat to monitor motor overtemperature;

• panel installation or with heat sink outside of the panel installation, to optimize the dissipation of heat inside the electrical panel;

• electrical connections can be made without needing to remove the cover;

• programmable acceleration curve to adapt to the required specifi cations  when starting compressor;

• high switching frequency to limit motor noise;

• detailed information on drive status via numerous read-only variables;

• protection functions for the drive (short-circuit, overcurrent, earth fault, overvoltage and undervoltage on the bus, overtemperature), motor

(overtemperature and limitation of current delivered) and system (Safety Torque Off input, communication failure).

Power+ 是一种驱动器，旨在通过无传感器无刷永磁 (PM) 电机 (BLDC/BLAC) 或异步感应电机控制压缩机。 该驱动器还可用于某些带有风扇和泵的应用，因此该设备可灵活用于空调和制冷行业。 它适用于面板安装或在面板外安装散热器。 配置和编程，以及运行/停止控制和速度参考，由 CAREL pCO 控制器或任何控制器设备通过 RS485 串行连接在主模式下使用 Modbus® 协议进行管理。

功能及主要特点

总之：

• 装配在配电盘上的紧凑尺寸；

• 在-20 至60°C 的环境温度下运行；

• 可安装在住宅和工业环境中；

• 通过串行网络连接到主可编程控制器；

• 网络地址可以通过设置内部的拨动开关来配置

驱动器；

• 可以控制各种类型的压缩机；

• 安全数字输入（Safety Torque Off）（如果提供）；

• PTC 热敏电阻或恒温器的专用输入，用于监控电机过热；

• 面板安装或在面板外安装散热片，以优化电气面板内部的散热；

• 无需拆盖即可进行电气连接；

• 可编程加速曲线以适应启动压缩机时所需的规范；

• 高开关频率以限制电机噪音；

• 通过大量只读变量获得有关驱动器状态的详细信息；

• 驱动器保护功能（短路、过流、接地故障、总线上的过压和欠压、过热）、电机

（过热和电流限制）和系统（安全转矩关闭输入，通信故障）。

CAREL变频器其他型号：

CAREL PSD1018400

CAREL PSD10184A0

CAREL PSD1024400

CAREL PSD10244A0

CAREL PSD1035420

CAREL PSD10354T0

CAREL PSD10354C0

CAREL PSD1040420

CAREL PSD10404T0

CAREL PSD10404C0

CAREL Inverter NEW + ORIGINAL+ ONE YEAR WARRANTY 

爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。

如果有任何关于CAREL变频器PSD10354T0的疑问，请随时与我们电联，（021-3100 6702），我们将尽全力解决您的问题。

If you have any question for CAREL products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.

CAREL变频器PSD10354T0规格介绍

• CAREL电源PSD1024400
• CAREL变频器PSD10354T0