IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 电气控制 >> 电路保护装置 >> 继电器丨继电器底座 >> DISIBEINT继电器PAAA系列

DISIBEINT继电器PAAA系列

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:PAAA 901 5A
DISIBEINT继电器PAAA系列 PAAA 901 5A
预估货期:
关  键  词:DISIBEINT继电器PAAA系列PAAA 901 5APAAA 230 1A
相似产品:
是否有问题?联系我们工作人员
  邮件联系

DISIBEINT继电器PAAA 901 5A描述

Difference

Current relay for general purpose.

Measurement

Detection in AC single phase.

Operating principle

Maximum current - Selector in“Position”oposition. When the supply voltage is connected, if the measure current is less than the pre-set value, the relay operates instantaneously. When the measure current exceeds the pre-set value, the relay releases after the time pre-set in the time control, and remains so until the measure current goes below the value pre-set in the hysteresis control. When supply voltage is connected, if the measure current exceeds the pre-set value, the relay operates instantaneously and remains so for a time equal to the one adjusted in the time control and releases afterwards.
Minimum current - Selector in“Negation”position. When the supply voltage is connected, if the measure current exceeds the pre-set value, the relay operates instantaneously. When the measure current goes below the value pre-set in the hysteresis control, the relay releases after the time pre-set in the time contol, and remains so until the current exceeds the pre-set value. When the supply voltage is connected,if the measure current is less than the value pre-set in the hysteresis control, the relay operates instantaneously and remains so for a time equal than the one pre-set in the time control. If whithin this interval of time the measure current exceeds the pre-set value, the relay remains operated.

Relay Inversion

By linking the terminals 6-7 (PAAA/B), Y1-Y3 (DAAA/B) or Y2-Z2 (SAAA/B), the relay reverses the contacts position.

Leds indication

Power on: Green
Relay on: Red

Currents greater than 5A

When currents greater than 5 A are to be controlled, one current transformer ratio X/5, class 1 must be used, where X is the closest value to the current to be controlled.

Hysteresis

Adjustable between 3% and 30% of the detection pre-set value.

Timing

Delay on detection adjustable from 0 to 30 s.


爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

DISIBEINT继电器PAAA 901 5A产品介绍

功能

它们控制调整后的余量之间的单相交流电流范围。当条件合适时,继电器将保持激活状态,并且当电流从这些裕度中移出时,它将禁用。

 

通过以下特征的组合来区分模型:

控制1、2或3个设定点。

固定或可调迟滞。

定时检测固定或可调。

显示测量值。

 

技术数据

PAAA-PAAB-DAAA-DAAB-SAAA-SAAB

最大或最小电流继电器

等级:0.1 mA..5 A在9个范围内

磁滞:3..30%

定时:0..30 s

 

DISIBEINT继电器PAAA 901 5A介绍及尺寸图

image.png 

 

DISIBEINT继电器PAAA系列其他常见型号:

DISIBEINT  PAAA 230 5A

DISIBEINT  PAAA 230 A10

DISIBEINT  PAAA 110 5A

DISIBEINT  PAAA 230 1A

DISIBEINT  PAAA 901 5A

DISIBEINT  PAAA 024 A10

DISIBEINT  PAAA 400

DISIBEINT  PAAA 440

DISIBEINT  PAAA 902

 

DISIBEINT Relay NEW + ORIGINAL+ ONE YEAR WARRANTY 

 

爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。

 

如果有任何关于DISIBEINT继电器PAAA 901 5A的疑问,请随时与我们电联,(021-3100 6702),我们将尽全力解决您的问题。

 

If you have any question for DISIBEINT products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.


DISIBEINT继电器PAAA系列 PAAA 901 5A选型及介绍

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。