GE传感器RS-FS-9009系列技术参数
Mechanical | |
Hot End Pipe Union: | 300 Series Stainless Steel |
Hot and Cool End Housings: | 300 Series Stainless Steel |
Hot End Mount: | 3/4” NPT female, 2-1/4" Union Nut |
Cool End Mount: | 2-1/2” Pipe Clamp for 1-5/8” Strut Channel |
Connectors: | |
Cool End to Interconnecting Cable: | MIL-DTL-38999 Series III size 15 (5 pin) |
Sensor: | Silicon Carbide photodiode |
Window: | Sapphire |
Operating | |
Sensitivity: | >5 mA @ 1x1010 photons/in2 /sec @ 310 nm |
Output: | Operating: 4 - 20 mA, Max < 21 mA |
Response time: | <175 milliseconds |
Power Requirements: | |
Cool End: | 12 - 30 VDC @ > 100 mA |
Interconnecting Cable: | Max voltage 300 Vrms |
Temperature Range: | |
Hot End: | -60℉to 617℉ (-51℃ to 325℃) |
Cool End: | -60℉to 284℉(-51℃ to 140℃) Operating |
Interconnecting Cable: | -60℉ to 482℉(-51℃ to 250℃) |
Relative Humidity: | 100% |
Process Pressure: | 400 psig (2.8 MPa) |
Vibration: | |
Hot End: | 0.0125” Double Amplitude; 10 – 88 Hz 5 G continuous; 88 – 1200 Hz |
Cool End: | IEC 60068-2-64 Spectrum A.2, Category 3 |
GE传感器RS-FS-9009系列产品介绍及尺寸图
The Flame Tracker Dry is an ultraviolet (UV) light sensitive detector used to measure the intensity of the flame in the combustion chambers of a gas turbine. Due to the use of a silicon carbide photodiode, the Flame Tracker Dry is very sensitive to the longer wavelength components of the UV light generated by the flame. These wavelengths penetrate the fog of fuel in the combustion can so the Flame Tracker Dry is significantly more sensitive to the flame than previous technologies, such as Geiger Mueller tubes. Being a UV sensitive device, the Flame Tracker Dry is not sensitive to the visible and infrared light generated by the hot combustion chamber walls so only the flame’s light is detected.
The Flame Tracker Dry also separates the UV light sensitive photodiode in the Hot End, mounted on the combustion cans, from the temperature sensitive electronics in the Cool End, mounted below the turbine in a cool zone. This allows the Flame Tracker Dry to be operated indefinitely without the use of a cooling system. The single unit cannot be modified or disassembled.
Flame Tracker Dry是一种紫外线（UV）光敏检测器，用于测量燃气轮机燃烧室中火焰的强度。由于使用了碳化硅光电二极管，Flame Tracker Dry对火焰产生的紫外线的较长波长分量非常敏感。这些波长会穿透燃烧罐中的燃料雾，因此，与以前的技术（例如盖革·穆勒管）相比，“火焰追踪器干燥”对火焰的敏感性要高得多。作为对紫外线敏感的设备，Flame Tracker Dry对燃烧室壁热产生的可见光和红外光不敏感，因此只能检测到火焰光。
火焰追踪器干燥器还将安装在燃烧罐上的热端中的紫外线敏感光电二极管与安装在凉爽区域中涡轮下方的冷端中的温度敏感电子设备分开。这样就可以在不使用冷却系统的情况下无限期地运行Flame Tracker Dry。单个单元不能修改或拆卸。
GE传感器其他型号：
GE RS-FS-9001
GE RS-FS-9009-03
GE 124T5712P0001
GE RS-E2-0285P001
GE 362A1052P104
GE sensor NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于GE传感器RS-FS-9009-03的疑问，请随时与我们电联，（021-3100 6702），我们将尽全力解决您的问题。
If you have any question for GE products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.
GE传感器RS-FS-9009-03介绍
