WOODWARD截止阀GSOV25规格描述
Technical data | |
Performance | |
Closing time | no more than 0.100 seconds at 6200 kPa input pressure |
Opening time | no more than 0.300 seconds at min. 690 kPa input pressure |
Pressure drop | <69 kPa at 11340 kg/h |
Seat leakage class | ANSI/FCI 70-2, Class VI |
Maximum effective aperture | 15.5 cm 2 |
Cycle resource | 20000 cycles |
Control valve ventilation | does not exceed 400 cm3 / min |
Back pressure | 0 from valve inlet with 3450 kPa applied to valve outlet with inlet at atmospheric pressure and solenoid de-energized |
Working conditions/Environment | NACE compliant for all gaseous fuels; contact Woodward for special applications |
Fuel temperature | from -4 to +177 °C |
Operating temperature | from -20 to +121 °C, from -20 to +105 °C for dual-coil version |
Fuel type | Natural gas, propane, ethane, methane |
Gas source pressure | During normal operation from 690 to 6205 kPa |
Test pressure | 9308 kPa |
Pulse pressure | 34,475 kPa |
Particulate Matter in Fuel | Less than 10 µm in diameter; max. volume fraction 0.000030 |
Control valve filtration | 40 microns |
External control pressure (optional) | 1380 – 6200 kPa |
Electrical parameters | |
Available voltages | Nominal 24V, 125V DC |
Power consumption | nominal 10W |
Resistance to ground | min. 50 Mohm at 500 VDC |
Electrical connections | 1/2-14 NPT for conduit; 36" coil leads, 18" proximity sensor leads |
Proximity sensor | Changeover contact, normally open and closed contacts to indicate valve closure and/or normally open and closed contacts to indicate valve opening. |
Mechanical characteristics | |
Installation | Flange ANSI B16.5; 272 kg, 2 in. (51 mm) nominal pipe size (6.500 diameter flange with eight 0.625-11 UNC through holes for 5.000 bolts all around at inlet; 6.500 diameter flange with eight 0.688 holes for 5.000 bolts all around at outlet) |
Side seal/ventilation connection | 0. 562-18 UNJF (-06) straight thread |
Weight | 34 kg |
Line pressure relief (removable plug) | 0.438-20 UNJF (-04) straight thread |
Connecting external control pressure | 0.438-20 UNJF (-04) straight thread |
Design | Stainless steel body; internal components – dispersion-hardened stainless steel |
WOODWARD截止阀GSOV25产品介绍
Woodward GSOV25 HT 燃料截止阀旨在以最快的速度关闭工业燃气涡轮发动机中的气体燃料。阀门关闭时,气流完全停止,从入口到出口没有泄漏。与标准版本相比,“HT”版本可以承受更高的燃料温度和更高的背压。它适用于 -20 至 +177 °C 的气体温度。该阀门在反向关闭时符合 ANSI Class IV 的关闭能力,压差为 3450 kPa。
常闭阀可用于紧急和正常关闭。特殊的密封设计可防止泄漏并延长使用寿命。不锈钢结构确保无论在何种腐蚀条件下都能保持高可靠性。
该产品适用于带有单个或分支燃料入口歧管的 10 至 50 W 工业涡轮机。
描述
GSOV25 HT 燃料截止阀通过快速关闭气体燃料的供应,提供了一种关闭燃气涡轮机的方法。施加的压力用于移动阀门中的弹簧活塞。当阀门通电时,气压使弹簧活塞保持打开状态,使燃料流向涡轮机。当电磁阀的电信号丢失时,次级弹簧活塞将反转以释放主控制压力。然后主弹簧迫使主活塞抵住密封件,从而停止流动。
The Woodward GSOV25 HT Fuel Shutoff Valve is designed to provide the fastest shutoff possible for gaseous fuel in industrial gas turbine engines. Gas flow is completely stopped when the valve closes, and there is no leakage from inlet to outlet. The “HT” version can withstand higher fuel temperatures and higher back pressure than the standard version. It is suitable for gas temperatures from -20 to +177 °C. The valve meets the shutoff capability of ANSI Class IV in the reverse direction with a pressure differential of 3450 kPa.
The normally-closed valve can be used for both emergency and normal shutoff. Special seal design prevents leakage and prolongs service life. Stainless steel construction ensures high reliability regardless of corrosive conditions.
The product is suitable for use on industrial turbines from 10 to 50 W with a single or branched fuel inlet manifold.
Description
The GSOV25 HT Fuel Shutoff Valve provides a means of shutting down a gas turbine by quickly shutting off the supply of gaseous fuel. The applied pressure is used to move a spring-loaded piston in the valve. When the valve is energized, the gas pressure holds the spring-loaded piston open, allowing fuel to flow to the turbine. When the electrical signal to the solenoid is lost, the secondary spring-loaded piston reverses to relieve the primary control pressure. The main spring then forces the primary piston against the seal, stopping the flow.
常用WOODWARD截止阀型号:
WOODWARD GSOV25
WOODWARD Stop valve NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。
如果有任何关于WOODWARD截止阀GSOV25的疑问,请随时与我们电联,(021-3100 6702),我们将尽全力解决您的问题。
If you have any question for WOODWARD products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.
WOODWARD截止阀GSOV25介绍