BEI IDEACOD模块60001系列技术参数
Output Code Format From Encoder | Dual Channel in quadrature with index and complements. Data lines are designated A, B, Z, A/, B/, Z/ at the module |
Output Signal Type From Encoder | Differential line driver (Use Connection Instructions #1) Single ended open collector with pull-up resistors internal to encoder (Use Connection Instructions #3) |
Output Signal Voltage Level From Encoder | 5 VDC (TTL, RS422 compatible, line driver) |
Frequency Response of Optical Isolator | 1 MHz, maximum |
Power Requirements For Optical Isolator | 5-28 VDC ±5%, 75mA plus load current |
Optical Isolator Output Options | 28V/V Line Driver, 100mA source/sink, Vout = Vin |
Protection Level | Supply lines protected against over voltage to 60 volts and reverse voltage |
Tristate Outputs | Available as –S Special Feature |
BEI IDEACOD模块60001系列介绍及选型
This is a versatile interface between an incremental encoder and receiving electronics. It accepts single ended or differential inputs and provides single ended or differential outputs in either an open collector or line driver configuration. It accommodates all standard operating voltages from 5 to 28 VDC. Up to eight Optical Isolator Modules can be daisy-chained to provide multiple, simultaneous outputs to controllers or PLC’s. This Optical Isolator can help clean up noisy signals by converting to a different line driver output. It has a 1 MHz throughput capability and can be used wherever a fast, optically isolated interface is required.
POWER : The optical isolator can accommodate standard operating voltages from 5 to 28 VDC. It should never be connected directly to AC power
mains. The module draws approximately 75 mA and a green LED indicates the unit is powered. The optical isolator module does not provide power to the encoder. Any encoders used in conjunction with this module must be connected to their own power.
SIGNAL : Specifying an optical isolator module requires knowledge of three system parameters: the DC supply voltage available in the system; the
encoder output type (logic levels and driver type); and the input signal specifications of the receiving electronics.
这是增量编码器和接收电子设备之间的通用接口。它接受单端或差分输入，并以集电极开路或线路驱动器配置提供单端或差分输出。它可以承受5到28 VDC的所有标准工作电压。可以菊花链方式连接多达八个光学隔离器模块，以向控制器或PLC提供多个同时输出。该光隔离器可通过转换为不同的线路驱动器输出来帮助清除噪声信号。它具有1 MHz的吞吐能力，可在需要快速，光隔离接口的任何地方使用。
电源：光电隔离器可适应5到28 VDC的标准工作电压。切勿直接将其连接到交流电源
电源。该模块消耗约75 mA电流，并且绿色LED指示设备已通电。光学隔离器模块不向编码器供电。与此模块结合使用的任何编码器都必须连接到自己的电源上。
信号：指定光隔离器模块需要了解以下三个系统参数：系统中可用的直流电源电压；的编码器输出类型（逻辑电平和驱动器类型）；以及接收电子设备的输入信号规格。
BEI IDEACOD模块60001系列其他常见型号：
BEI IDEACOD EM-DR1-lC-5-TB-28V/V 60001-003
BEI IDEACOD EM-DR1-IC-5-TB-28V/5 60001-002
BEI IDEACOD EM-DR1-IC-5-TB-28V/0C 60001-004
BEI IDEACOD EM-DR1-IC-15-TB-28V/V 60001-008
BEI IDEACOD EM-DR1-IC-15-TB-28V/5 60001-012
BEI IDEACOD EM-DR1-IC-15-TB-28V/OC 60001-014
BEI IDEACOD EM-DR1-IC-24-TB-28V/V 60001-010
BEI IDEACOD EM-DR1-IC-24-TB -28V/5 60001-011
BEI IDEACOD EM-DR1-IC-24-TB-28V/OC 60001-013
BEI IDEACOS Module NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于BEI IDEACOD模块60001-003的疑问，请随时与我们电联，（021-3100 6702），我们将尽全力解决您的问题。
If you have any question for BEI-IDEACOD products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.
BEI IDEACOD模块60001系列60001-003技术参数及介绍
