IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 工业过程控制及仪表 >> DCS >> 电源模块 >> BEL POWER电源模块W系列

BEL POWER电源模块W系列

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:LWN2660-6E
BEL POWER电源模块LWN2660-6E
预估货期:
关  键  词:BEL POWER电源模块LWN2660-6ELWN1240-6EM1LWR1840-6EM1
相似产品:
是否有问题?联系我们工作人员
  邮件联系

BEL POWER电源模块W系列产品参数

Specification


Manufacturer:

Bel Power Solutions

Product Category:

DIN Rail Power Supplies

Product:

Switching Supplies

Input Type:

1-Phase / Single Phase

Output Power:

247 W

Input Voltage:

85 VAC to 264 VAC, 90 VDC to 350 VDC

Number of Outputs:

2 Output

Output Voltage-Channel 1:

24.7 VDC

Output Current-Channel 1:

5A

Output Voltage-Channel 2:

24.7 VDC

Output Current-Channel 2:

5A

Industry:

Industrial

Length:

113.6 mm

Width:

103 mm

Height:

138 mm

Series:

W

Isolation Voltage:

2.8 kVDC

Open Frame/Enclosed:

Enclosed

Operating Temperature Range:

- 40 C to + 60 C

Brand:

Bel Power Solutions

Mounting Style:

DIN Rail

Maximum Operating Temperature:

+ 60 C

Minimum Operating Temperature:

- 40 C

Product Type:

DIN Rail Power Supplies

Factory Pack Quantity:

10

Subcategory:

AC-DC Power Supply

爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

BEL POWER电源模块W系列产品介绍

Convert Select前端系列代表具有功率因数校正功能的DIN导轨安装式DC-DC和AC-DC转换器系列。转换器是根据最新的行业要求和标准设计的。

该转换器非常适合在室外和其他要求苛刻的应用中使用,为楼宇控制系统,工厂自动化,工业控制,仪器仪表,电磁驱动器,风扇和其他直流负载供电。提供不同型号的单个输出或两个独立调节的12V,24V,36V或48V电隔离输出。

提供用于电池充电的特殊型号。EW模型特别适用于110 V铁路应用;它们是根据铁路标准EN 50155和EN 50121设计的。

Convert Select系列的主要功能包括具有低谐波失真的功率因数校正,可忽略的低浪涌电流,对瞬变和电涌的高度抗扰性以及低电磁辐射。内部保护电路,例如输入过压和欠压锁定,热保护以及通过第二个控制回路的输出过压保护,可确保最终系统的安全运行。

输出提供电隔离的安全特低电压(SELV)和低输出噪声。它们具有空载,过载和短路保护功能。电子控制的短期峰值功率能力高达额定输出功率的150%,使前端转换器能够为启动电动机提供额外的功率,或安全地操作后续的断路器。内置的大型输出电容器会吸收可能的反向能量,这可能是由于直接连接至输出的电磁驱动器快速减速引起的。前盖上的绿色LED显示输出的状态。

Convert Select系列是根据所有相关的国际安全标准设计的。该转换器已通过TÜV和UL认证,并获得UL 508认证。足够的电气间隙和爬电距离可在污染等级为3的环境中(使用交流输入)运行。所有电路板组件均涂有保护漆。

散热概念允许自由空气在满载条件下在高达60°C(LW型号)或70°C(EW型号)的环境温度下运行,而无需强制冷却。坚固的DIN卡扣装置可轻松可靠地固定在各种35 mm DIN导轨型号上。转换器配有笼式钳位端子,可从正面方便地进行操作。可选配带螺丝端子的系统连接器,用于预装配的线束,外部调节输出电压以及各种辅助功能。

字母E代表改进的LW型号的EMC性能。没有E的型号已过时。

 

The Convert Select front end series represents a family of DIN-rail mountable DC-DC and AC-DC converters with power factor correction. The converters have been designed according to the latest industry requirements and standards.

The converters are ideal for use in outdoor and other demanding applications to power building control systems,factory automation, industrial controls, instrumentation,electromagnetic drives, fans, and other DC loads. Different models are available with a single output or two independently regulated, electrically isolated outputs with 12, 24, 36, or 48 V.

Special models for battery charging are available. The EW models are particularly suitable for 110 V railway applications;they have been designed in accordance with the railway standards EN 50155 and EN 50121.

Key features of the Convert Select line include power factor correction with low harmonic distortion, negligibly low inrush current, high immunity to transients and surges, and low electromagnetic emissions. Internal protection circuits such as input over- and undervoltage lockout, thermal protection, as well as output overvoltage protection by a second control loop ensure safe operation of the final system.

The outputs deliver an electrically-isolated Safety Extra Low Voltage (SELV) and low output noise. They are no-load,overload, and short-circuit proof. The electronically controlled short-term peak power capability of up to 150% of the rated output power enables the front end converters to deliver additional power to start-up motors or to safely operate subsequent circuit breakers. Built-in large sized output capacitors absorb possible reverse energy, which may be caused by quick deceleration of electromagnetic drives connected directly to the output. A green LED at the front cover displays the status of the output(s).

The Convert Select Series was designed according to all relevant international safety standards. The converters are approved by TÜV and UL, and are UL 508 listed. Adequate clearances and creepage distances allow operation in pollution degree 3 environment (with AC input). All board assemblies are coated with a protective lacquer.

The thermal concept allows operation at full load up to an ambient temperature of 60 °C (LW models) or 70 °C (EW models) in free air without forced cooling. A rugged DIN snap-fit device allows easy and reliable fixing onto the various 35 mm DIN rail models. The converters are fitted with cage clamp terminals which are easily accessible from the front. System connectors with screw terminals for use with pre-assembled harnesses, external adjustment of the output voltage as well as various auxiliary functions are available as options.

The letter E stands for improved EMC performance of LW models. Models without E are obsolete.

 

型号解析

image.png 

 

BEL POWER电源模块W系列其他常见型号:

BEL POWER LWR1140-6EM1

BEL POWER LWN1140-6EM1

BEL POWER LWR1240-6EM1

BEL POWER LWN1240-6EM1

BEL POWER LWR1840-6EM1

BEL POWER LWN1840-6EM1

BEL POWER LWR1740-6EM1

BEL POWER LWN1740-6EM1

 

BEL POWER Converters NEW + ORIGINAL+ ONE YEAR WARRANTY

 

爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。

 

如果有任何关于BEL POWER电源模块LWN2660-6E的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。

 

If you have any question for BEL POWER products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.


BEL POWER电源模块LWN2660-6E产品参数

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。