RNA控制单元SCU1000技术参数
Power supply (can be changed internally): | 230 Volt AC, 50/60 Hz, +10 -10% oder |
Output voltage: | 40...208 Volt (eff.) adjustable, (230V Netz) |
Load current: | max. 6A (eff.) |
Fuses (in power input): | 2 miniature fuses, 5 x 20mm, M6.3A/250VAC |
Operating modes: | 1. asymmetric half-wave mode |
Mode change: | Coding jumper in load connector |
Enabling of functions: | internal/external, adjustable via parameters |
Enabling input, external contact: | floating, normally-open contact, approx. 24VDC, <10mA |
Enabling input, external 24V signal: | input protected against reverse polarity, voltage level |
Status outputs: | 24VDC, max. 30mA |
Power loss: | max. 18W |
Soft start / stop: | adjustable via parameters, default setting approx. 0.1 s |
Degree of protection: | IP 54 |
Radio interference suppression: | acc. to EMC directive |
Dimensions: | 130 x 203 x 135 (width x height x depth) |
Ambient temperature: | 0°C to 40°C |
Weight: | approx. 1,6kg |
Housing material: | aluminium/plastic |
Installation position: | vertical |
RNA控制单元SCU1000产品介绍
紧凑型控制单元为所有RNA振动驱动器提供高达6安培的负载电流,设计用于直接在振动驱动器上独立安装。进料速率针对 RNA 驱动器进行了优化,并且可以通过 LED 显示屏在设置范围内进行精确调整。即使电源电压出现波动,新型闭环控制功能也能保持进给率几乎恒定。控制器前面板上发光的翘板开关将所有极与电源断开。对于频繁开关应用或使用更高级别的控制系统操作时,通过浮动触点和16-30 VDC电压信号提供空载关闭。此外,控制系统的当前运行状态可以通过“READY”或“ACTIVE”信号进行监控。控制器可以在 230V 和110V电源下运行,这些电源可以通过内部开关进行选择。所有其他控制器设置均通过 LED显示屏进行。
The compact control unit supplies all RNA vibrating drives with load currents up to 6 amps and is designed for stand-alone installation directly at the vibrating drive. Feed rates are optimized for RNA drives and can be precisely adjusted within the setting range via the LED display. A novel closed-loop control function keeps the feed rate almost constant even if fluctuations in the mains voltage occur. The illuminated rocker switch on the controller front panel disconnects all poles from power supply. For frequent switching applications or when operating with a higher-level control system provision is made for no-load switching-off both by floating contact and by a 16-30 VDC voltage signal. Moreover, the current operating status of the control system can be monitored by means of a "READY" or "ACTIVE" signal. The controller can operate on both 230V and 110V supplies which can be selected on an internal switch. All other controller settings are made via the LED display.
RNA控制单元其他常用型号:
RNA SCU1000
RNA SCU2000
RNA ESK2.000
RNA ESK2.001
RNA ESK2.002
RNA ESR2.000
RNA ESR2.500
RNA ESR2.800
RNA ESR3000
RNA ESM906
RNA ESM910
RNA ESM3000
RNA SCP400
RNA EBC3000
RNA EBF05
RNA CONTROL UNITS NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。
如果有任何关于RNA控制单元SCU1000的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。
If you have any question for RNA products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.
RNA控制单元SCU1000介绍及技术参数