BECKHOFF接口模块EK1501-0010技术参数
Technical data | EK1501-0010 |
Task within EtherCAT system | coupling of EtherCAT Terminals (ELxxxx) to 100BASE-FX EtherCAT networks, with identity verification |
Data transfer medium | single-mode glass fiber 9/125 µm (SM) |
Distance between stations | max. 20,000 m (100BASE-FX) |
Number of EtherCAT Terminals | up to 65,534 |
Type/number of peripheral signals | max. 4.2 GB addressable I/O points |
Number of configurable IDs | 4096 |
Protocol | EtherCAT |
Delay | approx. 1 µs |
Data transfer rates | 100 Mbit/s |
Bus interface | 2 x SC Duplex |
Power supply | 24 V DC (-15%/+20%) |
Current consumption from US | 150 mA + (∑ E-bus current/4) |
Current consumption from UP | load |
Current supply E-bus | 2000 mA |
Power contacts | max. 24 V DC/max. 10 A |
Electrical isolation | 500 V (power contact/supply voltage/Ethernet) |
Weight | approx. 190 g |
Operating temperature | -25…+60°C |
Storage temperature | -40…+85°C |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Relative humidity | 95%, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
Protect. rating/installation pos. | IP20/variable |
Approvals/markings | CE, CCC, UL, ATEX, IECEx |
Ex marking | ATEX: II 3 G Ex ec IIC T4 Gc |
BECKHOFF接口模块EK1501-0010产品介绍
EK1501-0010 EtherCAT耦合器采用单模光纤连接，连接EtherCAT现场总线协议与EtherCAT端子之间的桥梁。该耦合器将以太网（100BASE-FX）传递的电文转换为E-bus信号表示。一个站点由一个耦合器和任意数量的EtherCAT端子组成，后者会自动检测并在过程图像中单独显示。
主要特点：
连接技术：2个单模光纤SC双工接口
连接距离：最长可达20公里
支持3个ID开关以实现可变拓扑结构
系统中EtherCAT端子的最大数量：高达65,535个
EK1501-0010配备两个SC双工端口和三个十六进制ID开关。耦合器通过上方的以太网接口连接到网络，下方的SC双工插座可用于连接同一段中的其他EtherCAT设备。单模光纤连接支持两个耦合器之间的距离长达20公里。通过十六进制ID开关，可以为一组EtherCAT组件分配唯一ID，从而实现灵活的网络定位。多种拓扑结构（如线型或星型）非常容易实现。此外，还可使用EtherCAT连接器或扩展器进行网络扩展。
系统和现场电源各为24V直流，直接在耦合器上供电。连接的EtherCAT端子从供电系统电压获取通信所需的电流。耦合器最多能提供5V、2A的电源。如需要更大电流，应配合使用电源终端（如EL9410）。现场电源通过带最大10A容量的接线触点传输至各个I/O组件。
The EK1501-0010 EtherCAT Coupler with single-mode fiber-optic connection is the link between the EtherCAT protocol at fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-FX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in the process image.
Special features:
connection technology 2 x single-mode fiber-optic connection via SC duplex
connection lengths up to 20 km
3 ID switches for implementing variable topologies
number of EtherCAT Terminals in the overall system: up to 65,535
The EK1501-0010 has two SC duplex sockets and three hexadecimal ID switches. The coupler is connected to the network via the upper Ethernet connection. The lower SC duplex socket may be used to connect further EtherCAT devices in the same segment. The single-mode fiber-optic connection facilitates distances between two couplers of up to 20 km. A group of EtherCAT components can be assigned a unique ID via the hexadecimal ID switches. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable. In addition, an EtherCAT junction or an EtherCAT extension can be used for the extension or for setting up a line or star topology.
The system and field supply, each 24 V DC, is provided directly at the coupler. The attached EtherCAT Terminals are supplied with the current required for communication from the supplied system voltage. The coupler can supply a maximum of 5 V and 2 A. Power feed terminals (e.g. EL9410) must be integrated if more current is required. The field supply is forwarded to the individual I/O components via the power contacts with up to 10 A.
BECKHOFF接口模块EK1系列其他常用型号：
BECKHOFF EK1100
BECKHOFF EK1000
BECKHOFF EK1501-0010
BECKHOFF EK1101-0008
BECKHOFF EK1101-0010
BECKHOFF EK1101-0080
BECKHOFF EK1110
BECKHOFF EK1110-0008
BECKHOFF EK1110-0043
BECKHOFF EK1110-0044
BECKHOFF EK1121-0010
BECKHOFF EK1122
BECKHOFF EK1122-0008
BECKHOFF EK1122-0080
BECKHOFF EK1300
BECKHOFF EK1310
BECKHOFF EK1322
BECKHOFF EK1400
BECKHOFF COUPLER NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向制造工业提供高端制造技术和设备。代理经营世界优质的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于BECKHOFF接口模块EK1501-0010的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。
If you have any question for BECKHOFF products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.
BECKHOFF接口模块EK1501-0010技术参数介绍
