Weight

3.9 kg

Motor size

84

Size

350 mm

Rotor surface

Painted black

Terminal box material

PP plastic

Electronics housing material

Die-cast aluminum, painted black

Blade material

Press-fitted, painted sheet steel blank, sprayed with PP plastic

Number of blades

5

Airflow direction

A

Direction of rotation

Clockwise, viewed toward rotor

Degree of protection

IP55

Insulation class

"F"

Moisture (F) / Environmental (H) protection class

H2+A

Max. permitted ambient temp. for motor (transport/storage)

+80 °C

Min. permitted ambient temp. for motor (transport/storage)

-40 °C

Installation position

Shaft horizontal or rotor on top; rotor on bottom on request

Condensation drainage holes

None

Mode

S1

Motor bearing

Ball bearing

Technical features

- Output 10 VDC, max. 10 mA - Operation and alarm display - Alarm relay - Integrated PID controller - Power limiter - Motor current limitation - PFC, active - RS-485 MODBUS-RTU - Soft start - Control input 10-0 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection

Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system)

<= 3,5 mA

Electrical hookup

Terminal box

Motor protection

Thermal overload protector (TOP) internally connected

Protection class

I (with customer connection of protective earth)

Conformity with standards

EN 61800-5-1 / CE

Approval

UL 1004-7 + 60730-1 / EAC / CSA C22.2 No. 77 +CAN/CSA-E60730-1