DELTATHERM冷却单元LT系列产品参数及选型表
小型冷却装置和低容量冷却系统
该模型系列是在DELTATHERM®的综合研究和多年实践经验的基础上开发的，并进一步改进。通过一系列措施，冷却能力，效率和运行可靠性得到进一步提高，并以此方式设计了引领潮流的冷水换热器。
LT系列的DELTATHERM®工业冷却系统包括以下组件：冷水回路，水回路和电气技术，完全安装在一个外壳中。循环介质（通常为水，任选还有防冻剂，油或去离子水）的冷却通过热交换器进行，该热交换器被称为蒸发器。
DELTATHERM®工业冷却器已准备好连接并已通过内部性能测试设备测试，已完全配备基本版本。根据客户的具体要求，提供全面的选项包，通过该选项包，能够满足所有客户在技术上可行的愿望。
Compact cooling units and cooling systems for low capacities
This model series was developed on the basis of comprehensive research and many years of practical experience by DELTATHERM® and further improved upon. Through a series of measures cooling capacity, efficiency and operational reliability were further improved and in this way a trend-setting cold water heat exchanger generation was designed.
The DELTATHERM® industrial cooling systems of the LT series consist of the following components: cold water circuit, water circuit and electrical technology, completely fitted in one housing. The cooling of the circulation medium (normally water, optionally also antifreeze, oil or deionised water) is carried out by a heat exchanger, which is known as the evaporator.
The DELTATHERM® industrial coolers, which are ready for connection and have been tested by our in-house performance testing equipment are already completely equipped in the basic version. For customer-specific requirements a comprehensive option package is available, with which we are able to fulfil all of our customers' technically feasible wishes.
冷却回路
冷流体回路主要由压缩机，风冷冷凝器，膨胀阀和蒸发器组成。根据工艺要求，还可提供径向冷凝器（用于风道连接），分体式冷凝器（外部/内部单元）和水冷式冷凝器。 只使用不含CFC的冷却剂，例如， R134a和R407C。所有冷却组件均由知名品牌制造商生产，保证可靠性，长使用寿命和全球可用性。整个冷流体回路设计用于工业冷却器的最佳和最经济的功能，并符合CE指令和DIN EN 378的最新标准。
The cooling circuit
The cold fluid circuit mainly consists of a compressor, an air-cooled condenser, expansion valve and evaporator. In accordance with the process requirements, also radial condensers (for the air duct connection), split condensers (outer/inner unit) and a water-cooled condenser version are available. We only use CFC-free coolants such as e.g. R134a and R407C. All cooling components are made by renowned brand manufacturers and guarantee reliability, long service life and global availability. The entire cold fluid circuit is designed for the optimal and most economic function of the industrial cooler and corresponds to the most recent Standards of the CE directive and of DIN EN 378.
电子电路
整个电子电路设计用于工业冷却器的最佳功能，符合CE指令和DIN EN 60204的最新标准。在LT系列的所有型号中，精确的温度控制由微处理器控制 数字温度控制器。 所有LT工业冷却器都适合室内安装，也可以选择安装在室外。
The electronics circuit
The entire electronics circuit is designed for the optimal function of the industrial cooler and corresponds to the most recent Standards of the CE directive and of DIN EN 60204. In all models of the LT series, precise temperature control is carried out by a microprocessor-controlled digital temperature controller. All LT industrial coolers are suitable for indoor installation and can optionally also be installed outside.
水循环
水回路的组件由不锈钢材料制成，完全安装在稳定的工业外壳中。水箱由非常稳定的水中性塑料制成，带有水箱盖（不锈钢水箱可选）。水回路与冷却回路的液压分离确保了工业中无穷无尽的应用领域。整个水回路安装在设备中，带有循环泵，泵压力计，用于泵保护的泵溢流阀，完整的管道系统以及防扩散和高效的绝缘。水回路（管道，蒸发器和泵）设计用于确定的流量和压力。不同的泵可用于特殊要求（更大的压力和/或更高的流量）。当然，除水之外的循环介质（例如油）也是可行的。作为通流冷却器（没有水箱，可能没有泵）的设计也是可行的。
The water circuit
The components of the water circuit are made as standard from stainless material and completely fitted in the stable industrial housing. The water tank is made from very stable and water-neutral plastic with tank cover (stainless steel tank as an option). The hydraulic decoupling of the water circuit from the cooling circuit ensures endless areas of application in industry. The complete water circuit is fitted in the device with a circulation pump, pump manometer, pump overflow valve for pump protection, complete pipework as well as a diffusion-proof and highly efficient insulation. The water circuit (piping, evaporator and pumps) is designed for a defined flow and pressure. Different pumps are available for special requests (more pressure and/or higher flow volume). Circulation media other than water (e.g. oil) are, of course, also feasible. The design as a through-flow cooler (without tank, possibly without pump) is also feasible.
DELTATHERM冷却单元LT系列 标准设备的规格概述
爱泽工业(IZE INDUSTRIES)特价经销、常用DELTATHERM冷却单元型号：
DELTATHERM冷却单元Mini 0.5
DELTATHERM冷却单元Mini 0.6
DELTATHERM冷却单元Mini 0.7
DELTATHERM冷却单元Mini 0.8
DELTATHERM冷却单元Mini 0.9
DELTATHERM冷却单元LTK1.4
DELTATHERM冷却单元LTK2.4
DELTATHERM冷却单元LTK3.4
DELTATHERM冷却单元LT4.5
DELTATHERM冷却单元LT5.5
DELTATHERM冷却单元LT6.5
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的首选渠道。
爱泽工业为用户提供咨询、资料上门、辅助选型，售后安装服务，操作人员免费培训等服务。
欢迎来电索取样本资料和产品信息。
如果有任何关于DELTATHERM冷却单元LT系列 示例LT4.5 002-5102的疑问，请随时与我们联系，爱泽工业（86-021-35350722）。我们将尽全力解决您的问题。
有关DELTATHERM冷却单元LT系列 示例LT4.5 002-5102产品更详细的信息或者购买DELTATHERM冷却单元LT系列 示例LT4.5 002-5102相关产品，请联系爱泽工业。
If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website:www.ize-industries.com.
DELTATHERM冷却单元LT系列介绍及选型
