KOLVER控制单元EDU2AE规格描述

KOLVER控制单元EDU2AE产品介绍

所有的Kolver螺丝刀都与控制单元配合使用，该控制单元用作AC至DC变压器和扭矩控制器。一旦达到预设扭矩，电子控制电路就会切断电动机的电源。

用于FAB和RAF螺丝刀的EDU1FR控制单元具有免维护的先进电子设备，无易损件。附加功能：慢速启动（0-2秒），可调速度（60％至100％）以及用于电源开/关和离合器动作的视觉指示器（绿色至红色）。

EDU1FR / SG控制器具有连接至后面板中一个连接器的附加电路：输出24V的扭矩和杠杆信号；输入：启动和反向触点。

对于PLUTO系列，EDU2AE为您提供了精确的扭矩控制电动工具的所有优势，而价格却只是干式工具的一小部分。附加功能：扭矩，可调节的扭矩和正向和反向速度，硬或软接头，缓慢的启动时间，最小和最大紧固时间，左右扭矩控制（仅适用于HP型号）：螺丝计数器，最大扭矩时间，自动反向，扭矩值显示（Nm或in.lbs）。所有单元的标准配置：远程启动，远程反向，扭矩达到信号，错误信号，紧急停止。

多扭矩系统旨在通过仅使用一个控制器和一个Pluto驱动器即可轻松访问多种扭矩设置，从而扩展PLUTO螺丝刀的功能。型号包括双扭矩输出单元和多扭矩单元EDU2AE / TOP。它具有多达8个程序，每个程序具有不同的扭矩值，速度，斜率，螺丝计数，批计数，用于打印机和PC连接的USB端口，带有实时时钟的扭矩表。

•8个独立程序：使用一把PLUTO螺丝刀，您可以更换8支常规螺丝刀。

•每个程序都可以接受以下设置：扭矩，速度，接头类型，要拧紧的螺丝数量，允许的拒绝数量，最小拧紧时间，最大拧紧时间，斜坡时间，自动反向，自动切换到下一个程序任何顺序，“允许”或“防止反向”选项：您可以为任何应用找到正确的设置，不要错过组件中的螺钉。

•密码保护：请勿篡改任何人。

•统计菜单，其中包含已完成工作的摘要：一天结束时，您将知道正确执行了多少个循环，错误执行了多少个，螺丝总数等。

•15个输入和11个输出连接器：您可以控制所有PLC的功能。

•选项包括USB端口，插槽托盘或开关盒：最大的灵活性。

•135 x 40mm蓝色巨人显示屏：易于从任何角度读取。

•通过用户友好的菜单轻松编程。

•价格比市场上任何同类产品低3倍。

新的EDU2AE / TOP控制单元具有：

•螺丝起子型号设置

•拧紧扭矩，紧固和旋松速度

•加速斜坡

•最小和最大紧固时间

•自动反向

•密码保护设置

•主流扭矩功能（可调节时间）

•顺时针或逆时针带转矩控制的旋转（左右螺钉）

•通过专用校准菜单在显示屏上以Nm为单位的转矩值

•螺钉计数功能

•带有OK或NOK信号的最小-最大转矩间隔

•8个独立程序：使用一把PLUTO螺丝刀，您可以更换8支常规螺丝刀。

•时间和日期

•通过条形码

选择程序•通过插座托盘和/或开关盒选择程序

•也提供带扭矩/角度组合控制功能的TA版本

All Kolver screwdrivers work in combination with a control unit acting as an AC to DC transformer and torque controller. The electronic control circuit cuts the power supply to the motor as soon as the pre-set torque has been reached.

The EDU1FR control units for FAB and RAF screwdrivers feature a maintenance free state-of-the-art electronics with no wearing components. Additional features: slow start (0-2 sec), adjustable speed (60% to 100%) and visual indicators (green–red) for power on/off and clutch action.

The EDU1FR/SG controller features additional circuits wired to one connector in the backpanel: output 24V for torque reached and lever signals; input: start and reverse contacts.

For the PLUTO series the EDU2AE gives you all the advantages of precision torque controlled electric tools at a fraction of the price of transdurized tools. Additional features: torque, adjustable torque and speed forward and reverse, hard or soft joint, slow start time, min and max fastening time, torque control right & left and only on HP model: screw counter, max torque time, autoreverse, torque value display (Nm or in.lbs). Standard on all units: remote start, remote reverse, torque reached signal, error signal, emergency stop.

The multiple torque system is designed to expand the functionality of the PLUTO screwdriver by enabling easy access to multiple torque settings with one controller and one Pluto driver only. Models include a double torque output unit and a multiple torque unit EDU2AE/TOP. It features up to 8 programs, each one with different torque values, speed, ramp, screw counting, batch counting, USB port for printer and PC connection, torque chart with real time clock.

• 8 independent programs: with one PLUTO screwdriver you can replace 8 conventional screwdrivers.

• Each program can accept the following settings: Torque, Speed, Type of Joint, Number of Screws to be tightened, Number of Rejects allowed, Minimum screwing time, Maximum screwing time, Ramp time, Auto reverse, Auto switch to the next program with any sequence, Allow or Prevent reverse option: you can find the correct setting for any applications, never miss a screw in your assembly.

• Password protected: no tampering from anybody.

• Statistics menu with summary of work done: at the end of the day you\'ll know how many cycles have been performed correctly, how many wrongly, total number of screws etc.

• 15 input and 11 output connectors: you can control all functions from PLC.

• Options include USB port, Socket tray or Switch box: maximum flexibility.

• Giant 135 x 40mm blue display: easy to read from any angle.

• Easy programming through user friendly menu.

• Price 3 times lower than any similar product in the market.

The new EDU2AE/TOP control unit features:

• screwdriver model setting

• tightening torque, fastening and unscrewing speed

• acceleration ramp

• min and max fastening time

• autoreverse

• password protect settings

• prevailing torque function (for an adjustable time)

• clockwise or counterclockwise rotation (right or left screws) with torque control

• torque value in Nm on the display through dedicated calibration menu

• screw count function

• min-max torque interval with OK or NOK signal

• 8 independent programs: with one PLUTO screwdriver you can replace 8 conventional screwdrivers.

• Time and date

• Program selection by barcode

• Program selection by socket tray and/or switchbox

• Also available in TA version with torque/angle combined control functions

KOLVER控制单元EDU系列其他型号：

KOLVER EDU1FR

KOLVER EDU1FR/SG

KOLVER EDU2AE/FR

KOLVER EDU2AE/HPro

KOLVER EDU2AE/TOP

KOLVER EDU2AE/TOP/E

KOLVER EDU1BL

KOLVER EDU1BL/SG

KOLVER EDU2AE/TOP/NT

KOLVER Transceiver NEW + ORIGINAL+ ONE YEAR WARRANTY

爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。

如果有任何关于KOLVER控制单元EDU2AE的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。

If you have any question for KOLVER products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.

KOLVER控制单元EDU2AE产品参数

• KOLVER电动螺丝刀EDU2AE/TOP/TA
• KOLVER控制器EDU系列 EDU2AE/HPRO
• KOLVER控制单元EDU2AE系列 EDU2AE