RYUKI流量计ODM-300系列技术参数
Specifications | |
Pressure range | 0.05~1.0MPa(G) |
Temperature range | 0~100°C (No condensation or freezing conditions.) |
Flow rate accuracy | 土2% (full scale) |
Connection method | Flange insertion methcd |
Differential pressure | MAX0.05MPa |
Contact specifications | |
Number of contacts | 1~2 |
Contact method | Microswitch |
Contact capacity | AC125V-5A, 250V-5A |
Withstand voltage | AC125V-5A, 250V-5A (resistance load) |
Insulation resistance | 100 MΩ or more with DC500V megger (between terminal and case) |
RYUKI流量计ODM-300系列介绍
1.结构紧凑，易于操作，易于安装在管道中。
2.流程指令采用机械操作，指令稳定，弹性极佳。
3.由于指示器的受压部分使用隔膜（特殊橡胶和布），因此具有优异的耐化学性，在强度和温度方面都足以满足一般用途。
4.由于指示器的机械部分位于大气中，因此几乎没有液体腐蚀。
5.由于微型开关可以在指示器中内置电触点，因此可以发送报警信号和流量指令。
6.即使最大水平距离与差压检测部分和流量指示器部分相距100米，也可以进行测量和远程指示。（分离型）
7.可以从一个探测器安装多个指示器，并可用于现场指令/远程指令/其他目的。
8.更换流量范围可以通过更换表盘和节流机构（孔板）轻松完成。
9.检测部分之前和之后的管道需要直管部分。
①入口侧：管道内径的10倍以上
②出口侧：管道内径的5倍以上
1. It is compact and easy to handle, it is easy to install in piping.
2. The flow instruction is mechanically operated, the instructions are stable and excellent in resilience.
3. Since the pressure receiving part of the indicator uses a diaphragm (special rubber with cloth), it has excellent chemical resistance, it is sufficient for general use both in terms of strength and temperature.
4. Since the mechanical part of the indicator is in the atmosphere, there is little corrosion by fluid.
5. Since electrical contacts can be built in the indicator by microswitches, it is possible to send alarm signals as well as flow instructions.
6. Even if the maximum horizontal distance is 100 m away from the differential pressure detection part and the flow rate indicator part, measurement and remote instruction is possible. (Separated type)
7. Multiple indicators can be installed from one detector, and can be used for on-site instructions / remote instructions / other purposes.
8. Changing the flow rate range can be easily done by replacing the dial plate and the throttle mechanism (orifice plate).
9. A straight pipe section is required for piping before and after the detection section.
① Entrance side: 10 times or more the pipe inner diameter
② outlet side: more than 5 times the pipe inner diameter
RYUKI流量计ODM-300系列选型
