PEAKTRONICS信号反馈变送器模块XMA-105技术参数
OPERATING VOLTAGE | 11 to 32 VDC |
OPERATING CURRENT | (not including output current and feedback pot) 5 to 8 mA |
INPUT SPECIFICATIONS | |
Zero (output = 4.0mA) | 0.2 to 5 VDC |
Span (output = 20.0mA) | 0.62 to 10 VDC |
Zero-to-Span Differential | 0.42 VDC minimum |
Input Impedance | 200K ohms |
FEEDBACK POTENTIOMETER | |
(total resistance) | 1K to 10K ohms |
ENVIRONMENTAL | |
Operating Temperature | -40 to 65 °C |
Storage Temperature | -40 to 85 °C |
Relative Humidity | 0 to 90 % (non-condensing) |
PEAKTRONICS信号反馈变送器模块XMA-105介绍
The Peaktronics XMA-105 is a 4-20mA transmitter that is specifically designed for use with the Peaktronics AMC, LRC, SVC, and DMC series controllers. When a feedback potentiometer of 1K to 10K ohms is used with the AMC/LRC/SVC/DMC unit, the XMA-105 can be used to provide a 4-20mA signal that is proportional to the potentiometer value. Since the feedback potentiometer monitors the position of an actuator, the 4-20mA signal can be used by a remote instrument to monitor or display actuator position. A 1-5V signal can be obtained by connecting a 250 ohm load resistor between the "4-20" and "-" terminals.
The zero and span adjustments on the XMA-105 allow the user to scale the 4-20mA signal to correspond with the zero and span positions set by the AMC/LRC/ SVC/DMC controller. After the AMC/LRC/SVC/DMC has been set, position the actuator to the zero position and adjust the XMA-105 zero to achieve the desired output (usually 4 mA). Then position the actuator to the span position and adjust the XMA-105 span to achieve the desired output (usually 20 mA). Repeat this process until the zero and span positions yield the desired output from the XMA105 without further adjustment.
Peaktronics XMA-105是一款4-20mA变送器，专门设计用于Peaktronics AMC，LRC，SVC和DMC系列控制器。当AMC / LRC / SVC / DMC单元使用1K到10K欧姆的反馈电位计时，XMA-105可用于提供与电位计值成比例的4-20mA信号。由于反馈电位计监视执行器的位置，因此远程仪器可以使用4-20mA信号来监视或显示执行器的位置。通过在“ 4-20”和“-”端子之间连接一个250欧姆的负载电阻，可以获得1-5V的信号。
XMA-105上的零位和跨度调整允许用户缩放4-20mA信号，以与AMC / LRC / SVC / DMC控制器设置的零位和跨度位置相对应。设置了AMC / LRC / SVC / DMC之后，将执行器定位到零位并调整XMA-105零位以达到所需的输出（通常为4 mA）。然后将执行器定位到跨度位置，并调整XMA-105跨度以达到所需的输出（通常为20 mA）。重复此过程，直到零位和跨度位置无需进一步调整即可从XMA105获得所需的输出。
PEAKTRONICS信号反馈变送器模块XMA系列选型
PEAKTRONICS信号反馈变送器模块其他常用型号：
PEAKTRONICS XMA-105
PEAKTRONICS XMA-106
PEAKTRONICS XMA-107
PEAKTRONICS Feedback signal transmitter module NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于PEAKTRONICS信号反馈变送器模块XMA-105的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。
If you have any question for PEAKTRONICS products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.
PEAKTRONICS信号反馈变送器模块XMA-105介绍及技术参数
