MCMILLAN气体流量计S-110(113)系列产品参数
Specifications | |
Accuracy (including linearity, best fit straight line) | Model S-110 ±3.0% Full Scale |
Repeatability | Model S-110 ±0.5% Full Scale |
Pressure Rating | Model S-110 40 psig (2.7 bar) |
Temperature Rating (Environment) | Model S-110 Operating Range 5-55ºC |
Wetted Materials | Model S-110 Ryton |
O-Ring Material | Model S-110 Standard Viton |
Fitting Material | Model S-110 Acetal |
Recommended Filtration | Model S-110 25 microns or less |
Output Signal | Model S-110 0-5 VDC |
Integrated Display | Model S-110 Integrated 3.5 digit LCD flow rate display Model S-113 Integrated 3.5 digit LCD flow rate display |
Power Requirements | Model S-110 Standard 12VDC 35 mA (11.5-15 VDC) |
Typical Response Time | Model S-110 Typically <30 seconds for 67% of final value |
Approvals/Certifications | Model S-110 CE Approved |
Ratings | Model S-110 IP10 (NEMA 1) |
Warranty | Model S-110 1 Year Limited Model S-113 1 Year Limited |
MCMILLAN气体流量计S-110(113)系列产品介绍
McMillan S-110型微型涡轮气体FLO-METERS能够测量几乎任何低至20-100 mL / min或高至100-500 Lpm的清洁气体或混合气体!使用获得专利的微型涡轮机设计可获得可重复的结果。这种经过验证的设计可准确测量流量,而无需零漂移且无需维护。
由于这些产品的紧凑尺寸和经济成本,S-110系列FLO-METERS模型适用于各种工业,商业,实验室和OEM应用。在流速随时间逐渐变化的应用中,可以接受30-45秒的响应时间,从而获得最佳结果。
还提供了一个模拟0-5 VDC输出,用于远程数据记录。集成的显示屏以工程单位显示实时流速,通常为毫升/分钟或升/分钟。
操作需要电源适配器或电缆。
S110型的功能和选项
准确性和线性
所有型号均具有±3.0%FS的标准精度规格,包括线性度。
显示
该设备具有集成的3.5位数字LCD显示屏,根据流速范围以mL /分钟或L /分钟显示实时流速。对于外部总计,请考虑250型。
电气连接
所有单元都有一个集成的4针连接器。要完成连接,应订购电缆组件或电源适配器。
流量范围
流量范围从20-100 mL /分钟到100-500 L /分钟。有关定制要求,请联系工厂。
流体连接
所有单元均标配压缩型管件。可以选择许多替代的配件类型和尺寸,如在产品配置器中可用。
功率
可以指定大多数设备以12VDC或24VDC电源运行。
信号输出
0-5 VDC模拟输出是标准配置。
型号S-113
McMillan S-113型微型涡轮气体FLO-METERS能够测量几乎任何低至20-100 mL / min或高至2-10 Lpm的清洁气体或混合气体!使用获得专利的微型涡轮机设计可获得可重复的结果。这种经过验证的设计可准确测量流量,而无需零漂移且无需维护。
由于这些产品的紧凑尺寸和经济成本,S-113系列FLO-METERS模型适用于各种工业,商业,实验室和OEM应用。在流速随时间逐渐变化的应用中,可以接受30-45秒的响应时间,从而获得最佳结果。
还提供了一个模拟0-5 VDC输出,用于远程数据记录。集成的显示屏以工程单位显示实时流速,通常为毫升/分钟或升/分钟。
S-113功能和选件
准确性和线性
所有型号均具有±3.0%FS的标准精度规格,包括线性度。
显示
该设备具有集成的3.5位数字LCD显示屏,根据流速范围以mL/分钟或L/分钟显示实时流速。对于外部总计,请考虑250型。
电气连接
所有单元都有一个集成的4针连接器。要完成连接,应订购电缆组件或电源适配器。
流量范围
流量范围从20-100 mL /分钟到4-20 L /分钟。有关定制要求,请联系工厂。
流体连接
所有单元均标配压缩型管件。可以选择许多替代的配件类型和尺寸,如在产品配置器中可用。
功率
可以指定大多数设备以12VDC或24VDC电源运行。
信号输出
0-5 VDC模拟输出是标准配置。
Model S-110
McMillan Model S-110 microturbine gas FLO-METERS are capable of measuring virtually any clean gas or gas mixture as low as 20-100 mL/minute or as high as 100-500 Lpm! Repeatable results are achieved using a patented microturbine design. This proven design accurately measures flow rates with no zero drift and no maintenance required.
Because of the compact size and economical cost of these products, the Model S-110 Series FLO-METERS are suitable for a wide variety of industrial, commercial, laboratory and O.E.M. applications. Best results will be achieved in applications where flow rates gradually change over time, where response times of 30-45 seconds are acceptable.
An analog 0-5 VDC output is also provided for remote data logging. The integrated display shows realtime flow rate in engineering units, usually mL/minute or L/minute.
A power adapter or cable is required for operation.
Model S110 Features & Options
ACCURACY & LINEARITY
All models have a standard accuracy specification of ±3.0% F.S., including linearity.
DISPLAY
This unit has an integrated, 3.5 digit LCD display to show realtime flow rate in either mL/minute or L/minute, depending on flow range. For external totalization, consider the Model 250.
ELECTRICAL CONNECTIONS
All units have an integrated 4-pin connector. To complete connections, either a cable assembly or power adapter should be ordered.
FLOW RANGES
Flow ranges from 20-100 mL/minute up to 100-500 L/minute are available. Contact the factory for custom requirements.
FLUID CONNECTIONS
All units have compression type tube fittings as standard. Many alternate fitting types and sizes may be selected as available in the Product Configurator.
POWER
Most units may be specified to operate with either 12VDC or 24VDC power.
SIGNAL OUTPUTS
A 0-5 VDC analog output is standard.
Model S-113
McMillan Model S-113 microturbine gas FLO-METERS are capable of measuring virtually any clean gas or gas mixture as low as 20-100 mL/minute or as high as 2-10 Lpm! Repeatable results are achieved using a patented microturbine design. This proven design accurately measures flow rates with no zero drift and no maintenance required.
Because of the compact size and economical cost of these products, the Model S-113 Series FLO-METERS are suitable for a wide variety of industrial, commercial, laboratory and O.E.M. applications. Best results will be achieved in applications where flow rates gradually change over time, where response times of 30-45 seconds are acceptable.
An analog 0-5 VDC output is also provided for remote data logging. The integrated display shows realtime flow rate in engineering units, usually mL/minute or L/minute.
S-113 Features & Options
ACCURACY & LINEARITY
All models have a standard accuracy specification of ±3.0% F.S., including linearity.
DISPLAY
This unit has an integrated, 3.5 digit LCD display to show realtime flow rate in either mL/minute or L/minute, depending on flow range. For external totalization, consider the Model 250.
ELECTRICAL CONNECTIONS
All units have an integrated 4-pin connector. To complete connections, either a cable assembly or power adapter should be ordered.
FLOW RANGES
Flow ranges from 20-100 mL/minute up to 4-20 L/minute are available. Contact the factory for custom requirements.
FLUID CONNECTIONS
All units have compression type tube fittings as standard. Many alternate fitting types and sizes may be selected as available in the Product Configurator.
POWER
Most units may be specified to operate with either 12VDC or 24VDC power.
SIGNAL OUTPUTS
A 0-5 VDC analog output is standard.
MCMILLAN气体流量计S-110(113)系列其他常见系列:
MCMILLAN 50D
MCMILLAN 50K
MCMILLAN 50S
MCMILLAN 50SD
MCMILLAN 80
MCMILLAN 80D
MCMILLAN 80SD
MCMILLAN 80S
MCMILLAN Gas Flow Meters Sensors NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。
如果有任何关于MCMILLAN气体流量计S-110(113)系列的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。
If you have any question for MCMILLAN products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.
MCMILLAN气体流量计S-110(113)系列产品参数