MCMILLAN流量传感器106系列
型号106
McMillan 106型FLO传感器能够测量极低的液体流速，从15 mL /分钟到10 L /分钟，满刻度精度为±1.0％或更高！
可以测量各种各样的流体。使用获得专利的Pelton型微型涡轮机叶轮可获得可重复的结果。自1988年以来，这种经过验证的设计就一直提供精确的结果，并且在连续运行服务无故障的多年中赢得了应有的声誉。
由于这些产品的紧凑尺寸和经济成本，因此106型FLO传感器适用于多种工业，商业，实验室和OEM应用。一些示例应用包括对烃类流体，燃料，轻油，溶剂，冷却剂，农药，弱酸，碱和去离子水的测量。
提供几种电源和输出配置，包括脉冲和模拟输出。NIST可追溯证书可用。
106型功能和选件
准确性/线性
模拟输出模型的精度指标为满量程的±1.0％（包括线性度）。脉冲输出模型的精度指标为满量程的±3.0％（包括线性度）。
校准
所有设备均在出厂时使用去离子水进行了校准。对于粘度不同于水的流体，可能需要校准曲线。
显示
McMillan具有与FLO-SENSORS一起使用的广泛的远程显示器。请在线查看显示内容，或要求工厂提供更多信息。
电气连接
所有单元均配有一条集成有PVC护套的电缆，并尾纤引线端接。这条4线电缆包括电源和信号连接。电缆长度在部件号中指定。
流量范围
流量范围从15-100 mL /分钟到1-10 L /分钟。有关定制要求，请咨询工厂。
流体连接
所有单元都有标准的压缩管配件。兼容Flaretek的外螺纹火炬接头是可选的。配件使用1/8“ NPT端口安装。出于组装考虑，配件只能由工厂安装和拆卸。非标准连接类型可能应要求提供。
MT安装板
标准型号106单元从底部安装。如图所示，可选的MT安装板允许从顶部安装设备。
功率
可以指定设备以12 VDC或24 VDC电源运行。各种电源适配器可用于12 VDC版本。
信号输出
可以将单元配置为脉冲输出或模拟输出。模拟输出选择包括4-20 mA，0-5 VDC和0-10 VDC。
TX外部涂层选项
标准的106型在外部具有暴露的铝和不锈钢部件。TX选件用PFA和聚对二甲苯涂层的组件替代了这些组件，以提供额外的防腐蚀元素保护。
超高压应用
如果要测量高纯度流体的流速，请考虑使用U707型或U708型。
湿材料
所有单元只有PTFE，全氟弹性体，蓝宝石和PFA作为润湿部件。
Model 106
McMillan Model 106 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better!
A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well-deserved reputation for continuous operational service for many years without failure.
Because of the compact size and economical cost of these products, the Model 106 FLO-SENSORS are suitable for a wide variety of industrial, commercial, laboratory and O.E.M. applications. Some sample applications include measurement of hydrocarbon fluids, fuels, light oils, solvents, coolant, pesticides, mild acids, alkalis, and deionized water.
Several power and output configurations are available,including both pulse and analog outputs. NIST Traceable certificates are available.
Model 106 Features & Options
ACCURACY/LINEARITY
Analog output models have an accuracy specification of ±1.0% full scale (including linearity). Pulse output models have an accuracy specification of ±3.0% full scale (including linearity).
CALIBRATION
All units are calibrated at the factory using deionized water. Calibration curves may be requested for fluids with viscosities differing from water.
DISPLAYS
McMillan has a comprehensive range of remote displays for use with FLO-SENSORS. Please review displays available online or request further information from the factory.
ELECTRICAL CONNECTIONS
All units have an integrated PVC-jacketed cable terminated with pigtail leads. This 4-wire cable includes both power and signal connections. Cable length is specified in the part number.
FLOW RANGES
Flow ranges from 15-100 mL/minute up to 1-10 L/minute are available. Consult the factory for custom requirements.
FLUID CONNECTIONS
All units have compression tube fittings standard. Flaretek-compatible male flare fittings are optional. Fittings are installed using 1/8″ NPT ports. Due to assembly considerations, fittings should only be installed and removed by the factory. Non-standard connection types may be available upon request.
MT MOUNTING PLATE
Standard Model 106 units mount from the bottom. The optional MT mounting plate allows the unit to be mounted from the top, as seen in the picture.
POWER
Units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are available for use with 12 VDC versions.
SIGNAL OUTPUTS
Units may be configured for either pulse output or analog output. Analog output choices include 4-20 mA, 0-5 VDC, and 0-10 VDC.
TX EXTERIOR COATING OPTION
The standard Model 106 has exposed aluminum and stainless steel parts on the exterior. The TX option replaces those components with PFA and Parylene coated components for extra protection against corrosive elements.
UHP APPLICATIONS
If you wish to measure the flow rate of a high purity fluid, consider the Model U707 or Model U708 instead.
WETTED MATERIALS
All units have only PTFE, perfluoroelastomers, sapphire, and PFA as wetted parts.
MCMILLAN流量传感器106系列其他常见系列：
MCMILLAN 106
MCMILLAN 106F
MCMILLAN IRIDIUM
MCMILLAN 101
MCMILLAN 102
MCMILLAN 104
MCMILLAN 107
MCMILLAN 108
MCMILLAN 400
MCMILLAN 470
MCMILLAN 501
MCMILLAN Liquid Flow Sensors NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于MCMILLAN流量传感器106系列的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。
If you have any question for MCMILLAN products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.
MCMILLAN流量传感器106系列产品参数
