POSITEK传感器X111系列产品参数
Specification | |
Intrinsic Safety | |
ATEX/IECEx approval | The sensor is ATEX/IECEx approved to: |
Galvanic Isolation Amplifier | Intrinsically safe sensors must be used with a galvanically isolated amplifier with safety parameters not exceeding:- Ui: 11.4V, Ii: 0.2A, Pi: 0.51W. Sensor can be installed with a cable length up to 1000m maximum from the amplifier, cable capacitance and inductance can be up to:- Capacitance: 200 nF max, Inductance: 810 μH max. |
Dimensions | |
Body Diameter | 35mm |
Body Length (Axial version) | Measurement length + 163mm |
Body Length (Radial version) | Measurement length + 186mm |
Push Rod Extension | Measurement length + 7mm |
Travel | Any stroke from 0-5mm to 0-800mm (e.g. 305mm) |
Independent Linearity | <±0.25% up to 450mm |
Temperature Coefficient | <±0.01%/°C Gain & <±0.01%FS/°C Offset |
Resolution | Infinite |
Noise | <0.02% FSO |
Frequency Response | >10KHz (-3dB) |
Temperature Limits | |
Operating | -40 to +80°C |
Storage | -40 to +125°C |
Other | |
EMC Susceptibility | EN 61000-6-2 |
EMC Radiated | EN 61000-6-3 |
Vibration | IEC 68-2-6: 10g |
Shock | IEC 68-2-29: 40g |
MTBF | 350,000 hrs 40°C Gf |
Sealing | IP65 (connector) / IP67 (cable) |
Electrical Connections | Screened cable or integral connector |
POSITEK传感器X111系列产品介绍
本质安全型X111已通过ATEX和IECEx认证，可用于潜在爆炸性气体/蒸气环境。X101传感器的这种重型版本具有更强的12.6mm推杆，推荐用于振动或需要更长行程传感器，水平安装并支撑在杆眼之间的应用。它仍然是为工业和科学反馈应用设计的价格合理，耐用，高精度的位置传感器。该装置高度紧凑且节省空间，几乎可以响应整个长度。像所有Positek传感器一样，X111提供与位移成比例的线性输出。每个传感器都提供根据客户要求的行程进行校准的输出，从0-5mm到0-800mm，并且内置了完整的EMC保护。
传感器非常坚固，阀体和推杆均由不锈钢制成，使用寿命长且耐环境腐蚀。在很宽的温度范围内，总体性能，可重复性和稳定性都非常出色。该传感器易于安装，安装选项包括M8杆眼轴承和车身夹具。推杆可免费提供或带有M8内螺纹，M8杆眼或圆顶端固定，可向任一方向弹跳加载的推杆装载在行程最大300mm的传感器上。根据所选的电缆或连接器选件，环境密封等级达到IP65或IP67。
Positek本安传感器设计为与电隔离放大器一起使用。可以从Positek 获得批准的电流隔离放大器（X005）。可选择0.5-9.5V或4-20mA传输输出。
传感器与放大器之间的电缆长度最长为1km。
The intrinsically safe X111 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. This heavy-duty version of the X101 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors, mounted horizontally, and supported between rod eyes. It remains an affordable, durable, high-accuracy position sensor designed for industrial and scientific feedback applications. The unit is highly compact and space-efficient, being responsive along almost its entire length. Like all Positek sensors, the X111 provides a linear output proportional to displacement. Each sensor is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.
The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance. Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install with mounting options including M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, an M8 rod eye, or dome end, Captive push rods can be sprung loaded, in either direction, on sensors up to 300mm of travel. Environmental sealing is to IP65 or IP67, depending on selected cable or connector options.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
选型参考
POSITEK传感器X111.600AI1000NSUZ375其他常见型号：
POSITEK X101
POSITEK X103
POSITEK X106
POSITEK X120
POSITEK X125
POSITEK X130
POSITEK E100
POSITEK E101
POSITEK E103
POSITEK P100
POSITEK P101
POSITEK X111.600AI1000NSUZ375
POSITEK LINEAR POSITION SENSOR NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于POSITEK传感器X111.600AI1000NSUZ375的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。
If you have any question for POSITEK products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com .
POSITEK传感器X111.600AI1000NSUZ375产品参数
