AI-TEK转速仪TACHTROL 30系列产品参数
Specification | |
Physical | Form A |
Contact Rating | 400mA @ 60V (AC or DC) |
Response Time (operate and release) | Operate: 2 ms max, 0.8 ms typical |
Electrical Isolation | 500 Vrms, 1 minute |
Switchpoint Accuracy | Internal instrument accuracy to alarm setpoint: ±.005% |
Ranges | 0 to 20mA, 4 to 20mA, -20 to 0 to +20mA; user selectable |
Accuracy | Internal instrument accuracy: ±.005%; plus ±.05% of full scale range at room temp with 400 ohm load; |
Resolution | Step size: 610 nanoamps per lsb. 16 bit D/A |
Linearity | ±0.02% typical |
Loop Impedance | 100-1000 Ω |
Response Time | Input to output 6.55 msec+ 1 msec settle at 1kΩ (worst case) to .1% of final value |
Electrical Isolation | 500 Vrms continuous |
Resolution | Black and White graphics display. 64x128 Pixels. |
Accuracy | ±.05% of full scale |
Communication Protocol | RS485: 19.2kbaud, 8-n-1 protocol, Half duplex,Tachometer is bus master |
Electrical Isolation | 500Vrms to ground continuous |
Utility RS485 | Full access to TACHLINK, single drop only |
Communication Protocol | RS485: 19.2kbaud, 8-n-1 protocol, Half duplex,Tachometer is bus master |
Maximum Transmission Distance | 8000 ft (2400m) |
Electrical Isolation | 500Vrms to ground continuous |
USB | Full access to TACHLINK,Version 1.1 / 2.0 compatible |
Processing Platform | PIC18F series micro controller |
Clock Speed | 10MHz, ±50 ppm at room temp |
Acquisition Time | Basic instrument acquisition time / period 6.55 ms |
Accuracy | Basic instrument accuracy ±.005% (50 ppm) |
Resolution | Basic instrument resolution: ±.025% or better |
AI-TEK转速仪TACHTROL 30系列产品介绍
TACHTROL 30计算转速表是双通道仪器。它测量输入频率并将结果转换为模拟输出,实用的RS485通讯,2个固态和2个机械继电器功能以及数字显示。
TACHTROL 10计算转速表与TACHTROL 30相同,但不包括固态继电器,模拟输出和实用的RS485功能。
这些仪器将接受广泛的交流或直流电源,并大大提高了精度,处理速度和响应时间。它们可以在速率,周期或计数器模式下使用。
简化的编程可以通过基于PC / Windows的TACHLINK或集成的显示/膜面板在现场或办公室完成。安全模式可确保对编程更改的未授权访问。
通常,新的TACHTROL 30或10与磁传感器一起用作信号源。但是,它们可以从任何频率源接收正弦波或方波TTL信号,包括来自双向霍尔传感器的相移频率以指示方向变化。
特点与优势:
更快的响应时间-7.6毫秒(模拟和显示),16.5毫秒(机械继电器),2毫秒(数字继电器)
更高的精度-0.1%(模拟和显示),0.005%(继电器)
现场可编程-使用TACHLINK或TACHTROL plus
数字配置-接近实时
模拟输出-0-20 mA,4-20 mA,-20至0至+20 mA
继电器-(2)机械C型,277 Vac时为6 A,(2)固态A型60 Vac或DC时为0.4A
交流或直流电源-80-264 Vac,50/60 Hz; 12-30伏直流电
数字显示-将接受(7)TACHTROL plus远程显示
9个计算函数
The TACHTROL 30 computing tachometer is a dual channel instrument. It measures input frequency and converts the resulting quantities to an analog output, utility RS485 communication, 2 solid state & 2 mechanical relay functions and digital display.
The TACHTROL 10 computing tachometer is the same as the TACHTROL 30 but excludes the solid state relays, analog output and the utility RS485 function.
These instruments will accept a wide range of AC or DC power and have greatly improved accuracy, processing speed and response time. They can be used in rate, period or counter mode.
The simplified programming can be done in the field or office via PC/Windows-based TACHLINK or through the integrated display/membrane panel. Security mode guarantees unauthorized access to programming changes.
Typically, the new TACHTROL 30 or 10 are used with magnetic sensors as a signal source. However, they may receive sine wave or square wave TTL signals from any frequency source including phase-shifted frequencies from bi-directional Hall sensors to indicate change in direction.
Features & Advantages:
Quicker Response Time - 7.6 ms (analog & display), 16.5 ms (mech. Relays), 2 ms (dig. Relays)
Higher Level of Accuracy - 0.1% (analog & display), 0.005% (relays)
Field Programmable - With TACHLINK or TACHTROL plus
Digital Configuration - Approaches real time
Analog Outputs - 0-20 mA, 4-20 mA, -20 to 0 to +20 mA
Relays - (2) mechanical Form C, 6 A @ 277 Vac, (2) solid state Form A 0.4A @ 60 Vac or DC
AC or DC Power - 80-264 Vac, 50/60 Hz; 12-30 Vdc
Digital Display - Will accept (7) TACHTROL plus remote displays
9 Computed Functions
AI-TEK转速仪TACHTROL 30系列其他常见型号:
AI-TEK T77610-10
AI-TEK T77610-40
AI-TEK T77610-70
AI-TEK T77630-10
AI-TEK T77630-40
AI-TEK T77630-70
AI-TEK computing tachometer NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。
如果有任何关于AI-TEK转速仪T77630-70的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。
If you have any question for AI-TEK products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.
AI-TEK转速仪T77630-70产品参数