Model

CDH-SR10V

Detection Surface

Front side detection

Detection Distance

10 mm

Hysteresis

10% or less of the detection distance

Detection Distance Variable Use Range

4.0 to 10.0 mm

Standard Detection Target

Grounded metal of 50 × 50 mm and 1 mm in thickness

Power Supply Voltage

12 V to 24 V DC (Operating voltage range : 10 V to 30 V DC)

Power Consumption

10 mA DC or less (With 24 V DC)

Output

30 V DC 100 mA DC or less NPN transistor open collector

Output Residual Voltage

1 V DC or less (Load current 100 mA DC)

Operation Configuration

Normally open (On output with detection target)

Operation Display

Red LED (Lit when On output)

Response Frequency

50 Hz or more

Operating Temperature Range

-10 to 55 °C (-15 to 60 °C during storage)(Without dew condensation or freezing)

Operating Humidity Range

35 to 95% RH (35 to 95% RH during storage)(Without dew condensation)

Withstand Voltage

1 min at 500 V AC 50/60 Hz (Between the live part and case)

Insulation Resistance

50 MΩ or more measured with an ohmmeter at 500 V DC (Between the live part and case)

Vibration Resistance

Durability : 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (At power off)

Shock Resistance

Durability : 3 times at 500 m/s² (approx. 50 G) in each X, Y, Z direction (At power off)

Protection Rating

IP65

Case Material

ABS (Hex nut : PBT, Rubber washer : NBR)

Cable

ø4, 3-core round cord of 0.2 mm² and 1 m in length (Oil and heat resistant)

Weight

Approx. 47 g (Without accessories)

Accessories

2 hex nuts (plastic), 2 rubber washers, 1 slotted screwdriver for adjustment