SENSOREX传感器ODO8000产品介绍
SPECIFICATIONS | |
Measurement Principle | Optical measurement via luminescence |
Measurement Ranges | 0.00-20.00 mg/L |
Accuracy | ± 0.1 mg/L |
Response Time | 90% in less than 60 seconds |
Measurement Interval | > 5s |
Membrane Cap | Cross Sensitivity: Organic solvents (acetone, toluene, chloroform, methylene chloride); Chlorine gas No Cross Sensitivity: pH 1-14, H2 S, CO2 , SO2 |
Temperature Compensation | 10K NTC |
Temperature Accuracy | 0.5°C |
Sample Temperature | 0-50°C (32 to 122°F) |
Max Pressure | 5 bar (72.5 PSI) |
Signal Output | Direct MODBUS RS-485 |
Power Supply | 12 Volts (±1Volt) |
Power Consumption | 1 W |
Dimensions | Diameter: 25 mm (0.98 in) x Length 146 mm (5.75 in) |
Weight | 450g (1lb) for sensor + 3m (10ft) cable |
Material | 316 Stainless Steel(ODO8000), Titanium (ODO9000) |
Protection Rating | IP68 |
SENSOREX传感器介绍
ODO8000 and ODO9000 - Lumin-S Optical Dissolved Oxygen Sensors with Digital Communication
Product Information
The Lumin-S optical dissolved oxygen sensor delivers reliable DO measurements over a long operating life. There are no membranes to replace, no electrolyte solutions to replenish, and no anodes to clean. Maintaining the sensor is as easy as replacing the optical sensing cap once every 1-2 years, and since all calibration data is stored on the cap, there’s no need to calibrate. This dissolved oxygen sensor outputs a Modbus/RS-485 digital signal for easy PLC integration.
Reliable measurements: Optical sensor technology delivers accurate DO monitoring with no drift and no minimum flow
Long operating life with minimal maintenance: No membranes, electrolyte solutions, or anodes – just replace the cap once every 1-2 years
No calibration: All calibration data is stored on the cap for quick and easy startup
Simple system integration: Use Modbus/RS-485 to integrate with a PLC or other control system
ODO8000 和 ODO9000 - 具有数字通信功能的 Lumin-S 光学溶解氧传感器
产品信息
Lumin-S 光学溶解氧传感器可在较长的使用寿命内提供可靠的DO测量。无需更换膜，无需补充电解质溶液，也无需清洁阳极。 维护传感器就像每 1-2 年更换一次光学传感帽一样简单，并且由于所有校准数据都存储在帽上，因此无需校准。 该溶解氧传感器输出 Modbus/RS-485 数字信号，以便于 PLC 集成。
可靠的测量：光学传感器技术可提供准确的溶解氧监测，无漂移且无最小流量
使用寿命长，维护最少：无需膜、电解质溶液或阳极 - 只需每 1-2 年更换一次盖子
无需校准：所有校准数据都存储在瓶盖上，以便快速轻松地启动
简单的系统集成：使用Modbus/RS-485与PLC或其他控制系统集成
SENSOREX传感器常见型号及订货号：
SENSOREX ODO8000
SENSOREX ODO9000
SENSOREX SENSOR NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于SENSOREX传感器ODO8000的疑问，请随时与我们电联，（021-3100 6702），我们将尽全力解决您的问题。
If you have any question for SENSOREX products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.
SENSOREX传感器ODO8000介绍
