爱泽工业2025年7月部分到货产品专题及库存
——J+J篇
如下为我司爱泽工业IZE_Industries本月到货J+J相关产品，欢迎致电索取样本资料和产品信息。
J+J执行器J4C-S20
J+J执行器J4C-S55
J+J执行器J4-S20
J+J执行器J4C-S35
J+J执行器J4C系列介绍
J4C 执行器主要用于自动化 1/4 转 (90°) 阀门。
多电压
该系统可控制输入电流，并在必要时将其转换为 24 VDC，这是所有 J4C 系列执行器电机的供电电压。
分体式 PCB
轻松更换 PCB。所有型号通用。
无刷发动机
用户可以享受减少维护、提高效率、降低发热和噪音的优势。
可视化操作控制
常亮的外部 LED 指示灯指示执行器正常运行。不同的 LED 指示灯闪烁颜色频率指示执行器的状态。
电子扭矩限制器
为防止损坏设备或阀门，执行器配备电子扭矩控制系统，当检测到电机功耗超过允许值时，该系统会停止执行器的运行。
系统停止执行器并释放齿轮上的压力，以便启动紧急手动控制 (MO)。同时，外部 LED 会发出彩色闪烁频率，指示执行器因扭矩过大而停止。
可分离手动紧急控制
将控制杆置于“手动”位置可自动断开电气系统与齿轮系的连接，阀门可手动操作。如果执行此操作后，控制杆未返回“自动”位置，并且未发出打开或关闭阀门的操控信号，则执行器将不会移动，LED 会频繁闪烁，指示执行器处于手动位置。
或低时间电压
占空比 (DUTY) 是指开始新操控之前的总操控时间，即运动时间加上执行器必须停止的时间。通常以百分比 (%) 为单位。了解操控的总时间对于计算阀门的开启和关闭过程非常重要。示例：占空比 75%
辅助微动开关
执行器配备 4 个微动开关：2 个用于停止电机，2 个无源辅助开关用于传输打开或关闭位置信号（开-关）。
温度控制
3.5W 恒温控制加热器自动将内部温度保持在 20°C (68°F) 以上，以防止冷凝损坏。操作结束后，切勿断开电源，否则将断开 ATC。
The J4C actuator is designed to automate mainly 1/4 turn (90º) valves
MULTI-VOLTAGE
This system controls and transforms the input current, if necessary, to 24 VDC, which is the voltage at which all J4C series actuator motors are powered.
SPLIT PCB
Easy PCB replacement. Common in all models.
ENGINE BRUSHLESS
Users can take advantage of reduced maintenance, improved efficiency, and reduced heat and noise.
VISUAL OPERATION CONTROL
Constantly illuminated external LED indicates normal operation of the actuator. There are different LED flash color frequencies that indicate the status of the actuator.
ELECTRONIC TORQUE LIMITER
To prevent damage to the unit or valve, the actuators have an electronic torque control system that stops the operation of the actuator when it detects a motor power consumption greater than permitted.
The system stops the actuator and releases pressure on the gears to facilitate activation of the emergency manual control (MO) and, at the same time, the external LED emits a frequency of colored flashes, indicating that the actuator has stopped due to excessive of torque.
DECLUTCHABLE MANUAL EMERGENCY CONTROL
Placing the lever in MANUAL automatically disconnects the electrical system from the gear train and the valve can be operated manually. If after doing this, the lever is not returned to the AUTO position and a maneuver signal is sent to open or close the valve, the actuator will not move and the LED will flash frequently indicating that the actuator is in manual position .
OR LOW TIME VOLTAGE
The DUTY is the total maneuver time before starting the new maneuver, that is, the time in motion plus the time the actuator must be stopped. It is generally measured in %. It is important to know the total time of the maneuver to calculate the valve opening and closing process. Examples: Duty 75%
AUXILIARY MICRO SWITCHES
The actuator is equipped with 4 microswitches: 2 for stopping the motor and 2 voltage-free auxiliary switches for transmitting the open or closed position signal (on-off).
TEMPERATURE CONTROL
A thermostatically controlled 3.5W heater automatically maintains the interior temperature above 68°F (20°C) to prevent damage from condensation. Never disconnect the power at the end of the maneuver as we will disconnect the ATC.
J+J执行器J4M系列介绍
J4M执行器专为多回转阀门设计。
多电压
该系统可控制输入电流，并在必要时将其转换为 24 VDC，这是所有 J4M 系列执行器电机的供电电压。
分离式 PCB
易于更换 PCB。所有型号均采用此设计。
蓝牙
他们在执行器中集成了蓝牙通信系统，使其能够通过任何安卓设备与执行器进行通信。用户可以通过手机或平板电脑控制执行器的开启、关闭或停止，并接收有关错误或事件等的信息。
无刷发动机
用户可以享受到减少维护、提高效率、降低发热和噪音的优势。
数字位置系统
模拟输入被发送到 CPU 进行处理，并与执行器的位置进行持续比较，从而获得极高的灵敏度以及极高的位置重复性（参见特性）。 DPS 与执行器电子系统通信，提供对执行器运动的全面管理。
可视化操作控制
外部 LED 常亮指示执行器正常运行。LED 闪烁颜色频率不同，指示执行器的状态。
可拆卸手动应急控制装置
将控制杆置于“手动”位置可自动断开电气系统与齿轮系的连接，阀门可手动操作。如果执行此操作后，控制杆未返回“自动”位置，且未发送打开或关闭阀门的操控信号，则执行器将不会移动，LED 指示灯将频繁闪烁，指示执行器处于手动位置。
或低时间电压
DUTY 是指开始新操控之前的总操控时间，即运动时间加上执行器必须停止的时间。通常以百分比表示。了解操控的总时间对于计算阀门的开启和关闭过程非常重要。示例：占空比 75%
温度控制
3.5W 恒温控制加热器自动将内部温度保持在 20°C (68°F) 以上，以防止冷凝损坏。操作结束后切勿断开电源，否则将断开 ATC 连接。
The J4M actuator is designed for multi-turn valves
MULTI-VOLTAGE
This system controls and transforms the input current, if necessary, to 24 VDC, which is the voltage at which all J4M series actuator motors are powered.
Split PCB
Easy PCB replacement. Common in all models.
BLUETOOTH
They has incorporated theBLUETOOTHcommunication system into the actuators, allowing them to communicate with them from anyANDROIDdevice. From their mobile phone or tablet, they can command the actuator to open, close, or stop, and also receive information about errors or incidents, etc.
ENGINE BRUSHLESS
Users can take advantage of reduced maintenance, improved efficiency, and reduced heat and noise.
POSITION SYSTEM DIGITAL
The analog inputs are sent to the CPU where they are processed for continuous comparison with the position of the actuator, this allows obtaining a very high sensitivity along with a very high repeatability of the position (see characteristics). The DPS in communication with the actuator electronic system provides comprehensive management of the actuator movement.
Visual control of operation
Constantly illuminated external LED indicates normal operation of the actuator. There are different LED flash color frequencies that indicate the status of the actuator.
Detachable manual emergency control
Placing the lever in MANUAL automatically disconnects the electrical system from the gear train and the valve can be operated manually. If after doing this, the lever is not returned to the AUTO position and a maneuver signal is sent to open or close the valve, the actuator will not move and the LED will flash frequently indicating that the actuator is in manual position .
Or Low Time Voltage
The DUTY is the total maneuver time before starting the new maneuver, that is, the time in motion plus the time the actuator must be stopped. It is generally measured in %. It is important to know the total time of the maneuver to calculate the valve opening and closing process. Examples: Duty 75%
Temperature control
A thermostatically controlled 3.5W heater automatically maintains the interior temperature above 68°F (20°C) to prevent damage from condensation. Never disconnect the power at the end of the maneuver as we will disconnect the ATC.
J+J执行器常用型号：
J+J J4C-S20
J+J J4C-S35
J+J J4C-S55
J+J J4C-S85
J+J J4C-B20
J+J J4C-B35
J+J J4C-B55
J+J J4C-B85
J+J J4C-S140
J+J J4C-S300
J+J J4C-B140
J+J J4M-S2
J+J J4M-B2
J+J J4M-S6
J+J J4M-B6
J+J J4M-S10
J+J J4M-B10
J+J J4M-S25
J+J J4M-B25
J+J J4M-S40
J+J J4M-B40
J+J J10H
如果您需要完整的J+J的相关技术咨询，请随时致电爱泽工业（021-3100 6702），或者访问网站www.ize-industries.com,我们将尽全力解决您的问题。
If you have any question for J+J，please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.
IZE-industries
Contact Information：
Tel：0086-21-31006702 or 0086-21-35350722
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：www.ize-industries.com
