美国METROLOGIC激光功率计45-545产品介绍及特征

45-545A型数字激光功率计是一款多功能仪器，具有许多研究应用和CDRH符合性测量所需的准确度。本机具有标准和峰值/保持辐射测量的设置以及用于校准/测量用户定义标准的百分比模式。该仪表采用带有大号12毫米高数字的低功耗LCD。

在标准和峰值/保持辐射模式下，仪表的四个量程显示19.99μW，199.9μW，1.999 mW和19.99 mW的满量程读数。

检测头是黑色阳极氧化铝，耐用，直径25毫米，深度30毫米。0.5米的可伸缩屏蔽电缆将探头与仪表内部电子元件电连接。侧面底盘上的卡扣式安装可在不使用时固定头部。抗震安装座中的光学传感器和滤波器位于头部内部。

BNC输出端子可提供与检测器光功率成比例的模拟信号。它可用于驱动带状记录仪，示波器和其他设备。模拟量输出范围从0到+2伏。光检测器和内部电路可检测并放大高达100 kHz的信号。（这使得仪表可以在教育演示中解调来自激光器的音频信号。）

在强度稳定的635nm二极管激光下，校准在满量程的5％以内。对于波长在500到950 nm之间的其他波长的单色光，内置的辐射过滤器可以校正到标准的20％以内。手册中的图表列出了450至950 nm的标称响应。

功率计封装在20×914×9厘米的外壳内，工作温度范围为10-30°C

特征：

易于阅读的数字读数

零点偏移调整来补偿环境光线

在100％的偏移量控制中有辐射模式; 以百分比直接显示读数

可拆卸探测器头带螺纹安装孔，可用于环台或光学工作台

包括校准图表和指导指南

双电源（110 VAC或两个9V电池便于携带）

The model 45-545A digital laser power meter is a multi-purpose instrument with the degree of accuracy required for many research applications and CDRH compliance measurements. This unit features settings for standard and peak/hold radiometric measurements and percentage mode for calibrating/measuring to user-defined standards. The meter employs a low-power LCD with large, 12 mm-high numerals.

In standard and peak/hold radiometric modes, the meter's four ranges display full-scale readings of 19.99 µW, 199.9 µW, 1.999 mW and 19.99 mW.

The detector head is black anodized aluminum for durability, 25 mm in diameter and 30 mm in depth. A 0.5 m retractable, shielded cable electrically connects the detector head to the meter's internal electronics. A snap-mount on the side chassis secures the head when not in use. Optical sensor and filters in shock-resistant mounts are located inside the head.

An analog signal, proportional to the optical power on the detector, is available from a BNC output terminal. It may be used to drive strip charge recorders, oscilloscopes and other devices. Analog output ranges from 0 to +2 volts. Signals up to 100 kHz can be detected and amplified by the optical detector and internal circuitry. (This allows the meter to demodulate audio signals from lasers in educational demonstrations.)

Calibration is within 5 percent of full scale at intensity stabilized 635nm diode laser light. For monochromatic light of other wavelengths within 500 to 950 nm, a built-in radiometric filter corrects to within 20 percent of standard. A chart in the manual lists nominal response from 450 to 950 nm.

The power meter is enclosed in a 20 x 914 x 9 cm housing and has an operating range from 10-30°C.

美国METROLOGIC激光功率计45-545

爱泽工业(IZE INDUSTRIES)特价经销、常用METROLOGIC激光功率计常用型号汇总：

METROLOGIC激光功率计ML268

METROLOGIC激光功率计ML800

METROLOGIC激光功率计ML801

METROLOGIC激光功率计ML810

METROLOGIC激光功率计ML811

METROLOGIC激光功率计ML820

METROLOGIC激光功率计ML840

METROLOGIC激光功率计ML855

METROLOGIC激光功率计ML868

METROLOGIC激光功率计ML869

METROLOGIC激光功率计ML869A

METROLOGIC激光功率计45-211

METROLOGIC激光功率计45-225

METROLOGIC激光功率计45-230

METROLOGIC激光功率计45-311

METROLOGIC激光功率计45-315

METROLOGIC激光功率计45-545

METROLOGIC激光功率计45-545A

METROLOGIC激光功率计45-600

METROLOGIC激光功率计45-633

METROLOGIC激光功率计45-633A

METROLOGIC激光功率计45-635

METROLOGIC激光功率计45-636A

METROLOGIC激光功率计45-658

METROLOGIC激光功率计45-688

METROLOGIC激光功率计45-700

METROLOGIC激光功率计45-600

METROLOGIC激光功率计45-720

METROLOGIC激光功率计45-788

METROLOGIC激光功率计45-688

METROLOGIC激光功率计45-940

METROLOGIC激光功率计45-941

METROLOGIC激光功率计45-942

爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的首选渠道。

如果有任何关于美国METROLOGIC激光功率计45-545的疑问，请随时与我们联系，（021-3100 6702），我们将尽全力解决您的问题。

有关美国METROLOGIC激光功率计45-545更详细的信息或者购买美国METROLOGIC激光功率计45-545关产品，请联系爱泽工业。

If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website:www.ize-industries.com.

METROLOGIC激光功率计常用型号汇总

• SAKAE电位器20HP-10S
• LOREME指示表IPL36/IPL36L
• LOREME转换分析仪IPL244
• LOREME网络分析仪IPL144L
• LOREME电流指示器IPL50/IPL50L
• 瑞士TESA电子倾斜仪CLINOBEVEL1USB 05330203