Accuracy

Output Signal Codes 2 and 3 ±1.0% of span
Output Signal Codes 7 and 8 ±2% of span

Linearity

±0.5% of span, typical
(maximum deviation limited by accuracy specification)

Repeatability

±0.25% of span, typical
(maximum deviation limited by accuracy specification)

Hysteresis

±0.5% of span, typical
(maximum deviation limited by accuracy specification)

Dead Band

0.1% of span

Supply Pressure Effect

A change in supply pressure causes a zero shift of less than 0.04% of span per kPa (0.25% per psi).

Ambient Temperature Effect

A 28°C (50°F) change in ambient temperature,within the operating limits of 0 and 60°C (32 and 140°F), causes zero and span shifts of ±1.0% of span, or less.

Inclination Effect

Maximum zero shift is 0.25% of span for a 5 degree angular change in inclination from the vertical. This error can be eliminated by calibrating instrument at its intended mounting position.

Shock Effect

Maximum zero shift is 0.5% of span when subjected to a shock test level of 300 m/s2 (30 “g”) measured at the feedback support bracket.

Normal Operating Temperature Limits

0 and 60°C (32 and 140°F)

Ambient Temperature Limits

–40 and +80C° (–40 and +180°F)

Relative Humidity Limits

0 to 100% RH, no condensate