SUN阀CKGBXCN技术参数
Technical Data | |
Cavity | T-17A |
Series | 3 |
Capacity | 60 gpm |
Maximum Operating Pressure | 5000 psi |
Pilot Ratio | 3:1 |
Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min. |
Valve Hex Size | 1 1/4 in. |
Valve Installation Torque | 150 - 160 lbf ft |
Model Weight | 1.16 lb. |
Seal kit - Cartridge | Buna: 990017007 |
Seal kit - Cartridge | EPDM: 990017014 |
Seal kit - Cartridge | Polyurethane: 990017002 |
Seal kit - Cartridge | Viton: 990017006 |
SUN阀CKGBXCN产品介绍
该阀是先导式开启止回阀。它有一个非密封先导阀、一个钢座，并且不通风。它允许从阀门（端口 2）到负载（端口 1）的自由流动，并阻止相反方向的流动。先导器（端口 3）处的压力会将阀门从端口 1 打开到端口 2。端口 3 处打开阀门所需的先导压力与端口 1 处的负载压力成正比。端口 2 处的压力与先导压力直接相反。
• 提供软管断裂保护，防止负载漂移并可靠锁定加压负载。
• 标准未密封先导阀可以将先导管路中截留的空气从回路中清除。
• 极低的泄漏。阀座和提升阀经过热处理，使用寿命长。如果负载因阀门而漂移，则阀座可能已因污染而损坏，应更换阀门。
• 可选的卡盘六角端外部端口可用于外部先导。在此配置中，端口 3 被阻止。
• 先导开启式单向阀是锁定阀，而不是运动控制阀。对于运动控制应用，请使用平衡阀。
• 该 3 端口先导打开止回阀和 3 端口平衡阀在物理上可互换（即，对于给定的框架尺寸，具有相同的腔体、相同的流路）。然而，墨盒从安装表面延伸的尺寸可能会有所不同。
• 对于具有手动负载释放控制选项的型号，顺时针旋转负载释放装置以释放负载。
• 配置有 EPDM 密封件的阀芯适用于含有磷酸酯液体的系统。接触石油基液体、油脂和润滑剂会损坏密封件。
• 采用 Sun 浮动式结构，最大限度地减少由于安装扭矩过大和/或型腔/墨盒加工变化而导致内部零件粘合的可能性。
This valve is a pilot to open check valve. It has a non-sealed pilot, a steel seat, and is non-vented. It allows free flow from the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) will open the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportional to the load pressure at port 1. Pressure at port 2 directly opposes pilot pressure.
• Provides hose break protection, prevents loads from drifting and positively locks pressurized loads.
• Standard unsealed pilot allows air trapped in the pilot line to be purged from the circuit.
• Extremely low leakage. The seat and poppet are heat treated for long life. If the load drifts due to the valve, the seat has probably been damaged by contamination and the valve should be replaced.
• Optional external porting out of the hex end of the cartridge is available for external piloting. • Pilot-to-open check cartridges are locking valves, not motion control valves. For motion control applications, use counterbalance valves.
• This 3 port pilot-to-open check valve and 3 port counterbalance valves are physically interchangeable (i.e. same cavities, same flow path for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
• For models with manual load release control option, turn load release clockwise to release load.
• Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. • Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix
SUN阀CKGB系列其他常用型号：
SUN CKGBXCN
SUN CKGBXCN/AP
SUN CKGBXCN/LH
SUN CKGBXCV
SUN CKGBXCV/AP
SUN CKGBXCV/LH
SUN CKGBXCE
SUN CKGBXCE/AP
SUN CKGBXCE/LH
SUN CKGBXAN
SUN CKGBXAN/AP
SUN CKGBXAN/LH
SUN CKGBXAV
SUN CKGBXAV/AP
SUN CKGBXAV/LH
SUN CKGBXAE
SUN CKGBXAE/AP
SUN CKGBXAE/LH
SUN VALVE NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向制造工业提供高端制造技术和设备。代理经营世界优质的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于SUN阀CKGBXCN的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。
If you have any question for SUN products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.
SUN阀CKGBXCN技术参数介绍
