爱泽工业2023年9月部分到货产品专题及库存
——安全阀篇
如下为我司爱泽工业IZE_Industries本月到货安全阀相关产品，欢迎致电索取样本资料和产品信息。
HEROSE安全阀06388.1004.6000 BAILEY安全阀70752EL
DURGO安全阀SV-77-G20/CU22-0500 HANSA安全阀KSV442240
GENERANT安全阀VRV125B-T-15 CIRCLE VALVE安全阀2349R-3PP
低温安全阀，角型，青铜，PN50，经过TÜV-SV.780.S/G型式测试
全启式安全阀，孔口 d0=23mm 标准安全阀，带碳填充 PTFE 阀门密封件，孔口 d0=23mm，带 PCTFE 密封件，封闭式阀盖“针对氧气应用进行清洁和脱脂”
零件号 06388.X.0000
入口：符合 ISO 228/1 的 G 型外螺纹 (BSPP)，出口：符合 ISO 228/1 的 G 型内螺纹 (BSPP)
零件号 06388.X.2000
入口：符合 ISO 7/1 的 R 型外螺纹 (BSPT)，出口：符合 ISO 228/1 的 G 型内螺纹 (BSPP)
零件号 06388.X.5000
入口：外螺纹 NPT，符合 ANSI B 1.20.1，出口：内螺纹 G 型 (BSPP)，符合 ISO 228/1
零件号 06388.X.6000
入口：外螺纹 NPT，符合 ANSI B 1.20.1，出口：内螺纹 NPT，符合 ANSI B 1.20.1
可用选项 - 仅应要求提供：
· 外部部件镀镍 · 出口处安装有弯头
· 出口处有额外的排水孔 (1)
Cryogenic Safety Valve, angle type, bronze, PN50, type tested TÜV-SV.780.S/G
Full lift safety valve, orifice d0=23mm standard safety valve, with carbon filled PTFE valve seal, orifice d0=23mm with PCTFE seal, closed bonnet "cleaned and degreased for oxygen service"
Part No. 06388.X.0000
Inlet: male thread type G (BSPP) acc.to ISO 228/1, Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06388.X.2000
Inlet: male thread type R (BSPT) acc. to ISO 7/1, Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06388.X.5000
Inlet: male thread NPT acc. to ANSI B 1.20.1, Outlet: female thread type G (BSPP) acc. to ISO 228/1
Part No. 06388.X.6000
Inlet: male thread NPT acc. to ANSI B 1.20.1, Outlet: female thread NPT acc. to ANSI B 1.20.1
Available options - on request only:
· external parts nickel plated · with installed elbow at the outlet
· with additional drain hole at the outlet (1)
Bailey 707 安全泄压阀采用顶部导向设计，将畅通无阻的阀座孔与高升力能力相结合。 这种青铜阀体阀门可配备弹性或金属阀内件，并可选择螺纹和法兰连接。
Bailey 707 已通过 BS EN ISO 4126 第 1 部分 (BS6759 pt 1:2:3) 认证，适用于空气/气体、蒸汽/热水（100°C 以上）和工艺液体。
测试杆可用于在线安全检查，或者可以提供密封圆顶用于需要在排放侧进行压力密封的使用条件，例如， 带封闭排放的液体服务。
The Bailey 707 Safety Relief Valve encompasses a top guided design, combining an unobstructed seat bore with high lift capability. This bronze bodied valve can be supplied with a resilient or metal trim with a choice of screwed and flanged connections.
The Bailey 707 is certified to BS EN ISO 4126 Part 1 (BS6759 pt 1:2:3) and is suitable for duty on air/gas, steam/hot water (above 100˚C) and process liquid.
Test levers are available for inline safety checking, alternatively a sealed dome can be supplied for service conditions requiring a pressure tight seal on the discharge side, e.g. liquid service with enclosed discharge.
Durgo 黄铜安全阀 GT-77 是渐进式的，可用于水和油等设施。阀体、接头和锥体采用抗脱锌黄铜，密封材料为氟化橡胶（FPM/FKM）。
• 连接（入口/出口）
– 15/22、20/22、入口外螺纹(ISO-G)、出口压缩接头。
– 15/20、20/20，入口和出口外螺纹 (ISO-G)。
• 打开压力3.0-10 bar (0.3–1.0 MPa)。
• 温度范围-30°C 至+125°C
Durgo safety valve GT-77 in brass The valves are progressive and can be used in installations with e.g. water and oil. The valve housing, nipple and cone are in dezincification resistant brass with seal material of fluorinated rubber (FPM/FKM).
• Connection (Inlet/Outlet)
– 15/22, 20/22, inlet male thread (ISO-G), outlet compression fitting.
– 15/20, 20/20, inlet and outlet male thread (ISO-G).
• Opening pressure 3.0-10 bar (0.3–1.0 MPa).
• Temperature range -30°C to +125°C.
类型：VRV 排气安全阀
尺寸：1/8 英寸 – 1 英寸（DN4 – DN25）
压力范围：0.03 – 10 bar (0.5 – 150 psig)
温度范围：-220°C / -320°F 至 +205°C / +400°F
描述：VRV 排气安全阀结构紧凑，精度高，开启压力可重复。 零泄漏和防篡改设计。 该阀门非常适合大多数液体或气体应用。
选项包括：内联（公 x 母）、带导流帽的大气通风口。
Type: VRV Vent Relief Valve
Size: 1/8" – 1" (DN4 – DN25)
Pressure Range: 0.03 – 10 bar (0.5 – 150 psig)
Temperature Range: -220°C / -320°F up to +205°C / +400°F
Description: VRV vent relief valve is compact and highly accurate with repeatable cracking pressure. Zero leakage and tamper proof design. This valves is ideally suited for most liquid or gas applications.
Options Include: Inline (male x female), vent to atmosphere with defl ector cap.
安全阀常用型号：
HEROSE 06388.1004.6000
HEROSE 06388.1006.6000
HEROSE 06388.0704.6000
HEROSE 06388.0706.6000
HEROSE 06388.1510.6000
HEROSE 06388.2312.6000
HEROSE 06388.2314.6000
HEROSE 06388.2320.6000
BAILEY 70752EL
BAILEY 2C/1DF422/C
BAILEY 5F2/421200/C
BAILEY 1C/202422/C
BAILEY 70712VD-8.3-15.89
BAILEY FS13535
BAILEY 7461162D
BAILEY 70712VD
BAILEY 707MD
BAILEY 707ML
BAILEY 707ED
BAILEY 707VD
BAILEY 707VL
BAILEY 707EL
DURGO SV-77-G15/CU22-0100
DURGO SV-77-G15/CU22-0150
DURGO SV-77-G15/CU22-0200
DURGO SV-77-G15/CU22-0300
DURGO SV-77-G15/CU22-0400
DURGO SV-77-G15/CU22-0500
DURGO SV-77-G15/CU22-0600
DURGO SV-77-G15/CU22-0700
DURGO SV-77-G15/CU22-0750
DURGO SV-77-G15/CU22-0800
DURGO SV-77-G15/CU22-0850
DURGO SV-77-G15/CU22-0900
DURGO SV-77-G15/CU22-0950
DURGO SV-77-G15/CU22-1000
DURGO SV-77-G20/CU22-0100
DURGO SV-77-G20/CU22-0150
DURGO SV-77-G20/CU22-0200
DURGO SV-77-G20/CU22-0300
DURGO SV-77-G20/CU22-0400
DURGO SV-77-G20/CU22-0500
DURGO SV-77-G20/CU22-0600
DURGO SV-77-G20/CU22-0700
DURGO SV-77-G20/CU22-0750
DURGO SV-77-G20/CU22-0800
DURGO SV-77-G20/CU22-0850
DURGO SV-77-G20/CU22-0900
DURGO SV-77-G20/CU22-1000
HANSA KSV2442010050
HANSA KSV2442015050
HANSA KSV2442020020
HANSA KSV2442025050
HANSA KSV2442030050
HANSA KSV2442440050
HANSA KSV2442070050
HANSA KSV2442080050
HANSA KSV442240
GENERANT VRVD-1000SS-V-110
GENERANT VRV-125B-V-9
GENERANT VRV-125B-V-110
GENERANT OPC-4SS-V-10
GENERANT VRV-125B-V-1.6
GENERANT CRV8-8-K-348
GENERANT CRV8-8-K-131
GENERANT CRV8-8-K-203
GENERANT VRV-125B-S-10
GENERANT VRV-125B-S-15
GENERANT VRV-125B-S-7
GENERANT VRV-125SS-V-20
GENERANT VRV-14-4
GENERANT VRV-18175
GENERANT VRV-250B-V-100
CIRCLE 2349R-2PP
CIRCLE 2349R-3PP
CIRCLE 532B-4M-55
CIRCLE HP532B-2M-280
CIRCLE 232B-8PP
CIRCLE 532B-1M-25
CIRCLE 2332B-2PP
CIRCLE 2332B-2MM
CIRCLE 2349B-2PM
CIRCLE 2349B-2MP
CIRCLE 2359B-6PP
CIRCLE 2333B-4PP
CIRCLE 2332R-2MP
CIRCLE 2359R-2PP
CIRCLE 2320R-1PP
CIRCLE 2333R-2PP
CIRCLE 2362R-2MP
CIRCLE 2362R-6PP
如果您需要完整的安全阀的相关技术咨询，请随时致电爱泽工业（021-3100 6702），或者访问网站www.ize-industries.com,我们将尽全力解决您的问题。
If you have any question for SAFETY VALVE，please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.
IZE-industries
Contact Information：
Tel：0086-21-31006702 or 0086-21-35350722
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：www.ize-industries.com
