REHOBOT Hydraulics 是一家成功的瑞典公司，致力于开发、生产和销售基于高压液压的产品和系统。
REHOBOT手动泵PHS系列介绍
产品描述
所有REHOBOT的PHS系列双级液压手动泵标配压力表，为操作人员提供精确和安全的作业控制。压力表直接安装在泵上，并由专门设计的泵杆保护。双级功能使泵使用更加简便，确保相较于单级泵，气缸或工具能显著更快地达到工作位置。
所有泵均标配液压回油连接。
坚固的铝制油箱，重量轻且便于加油。
泄压阀提供精确的泄压控制。
安装孔用于固定安装，泵杆锁定系统便于运输。
LS201、LS250和LS301泵为含软管和配件的完整套件，可立即使用。
压力表
对于PHS70-xxxx和PHS80-xxxx系列的液压手动泵，使用型号为50777的压力表，显示屏直径为Ø60毫米。
对于PHS100-xxxx和PHS150-xxxx系列的液压手动泵，使用型号为TX104的压力表，显示屏直径为Ø60毫米。
型号以W结尾的泵配有直杆而无压力表。
REHOBOT还为压力达到150 MPa及以上的泵提供显示屏直径为Ø100毫米的较大压力表。
对于PHS150-xxxxL系列的泵，使用型号为AMT151的压力表，显示屏直径为Ø100毫米。
对于PHS240-xxxxL和PHS280-xxxxL系列的泵，使用型号为AMT301的压力表，显示屏直径为Ø100毫米。
对于PHS300-xxxxL系列的泵，使用型号为AMT401的压力表，显示屏直径为Ø100毫米。
在本页面上，您将找到更多关于REHOBOT压力表的信息。REHOBOT还提供不带压力表的PHS系列液压手动泵。对于显示屏的替代设计请求，我们也可以进行审核。如需额外的压力表保护，请参见“压力表保护”。
PHS200-1000L、PHS200-2400L、PHS240-2400L、PHS240-4100L、PHS280-2400L和PHS300-1000L专为超高压设计。所有附加组件和配件都必须设计用于超高压，例如配备锥形密封件。这些泵的液压压力连接为9/16″- 18 UNF螺纹接口，带60°内锥。回油连接为G1/4″内螺纹。
注意：所有其他PHS泵的液压压力和回油连接为两个G1/4″螺纹接口。
技术提示：选择液压系统的配件时，其压力范围应等于或高于泵的最大工作压力。对于软管，我们建议最大工作压力与爆裂压力之间保留3-4倍的安全
Product description
All REHOBOT's PHS series two-stage hydraulic hand pumps are equipped with a pressure gauge as standard. This gives the operator precise and safe control over the work being done. The pressure gauge is mounted directly on the pump and is well protected by the specially designed pump lever. The two-stage function makes the pump easier to use, and ensures that the cylinder or tool reaches its working position significantly faster compared to single-stage pumps.
Hydraulic return connection is standard on all pumps.
Robust aluminium tank with low weight and easy oil filling.
Relief valve provides precise control of the relief.
Mounting holes for fixed installations and pump lever locking system for easy transport.
The LS201, LS250 and LS301 pumps are complete kits with hose and fittings - ready for immediate use.
Pressure gauges
For hydraulic hand pumps in the PHS70-xxxx and PHS80-xxxx series, pressure gauge 50777, Ø60 mm display is used.
For hydraulic hand pumps in the PHS100-xxxx and PHS150-xxxx series, pressure gauge TX104, Ø60 mm display is used.
Pumps with a designation ending in W are supplied with a straight lever without a pressure gauge.
REHOBOT also offers pressure gauges with a larger display of Ø100 mm for pumps with pressures of 150 MPa and above.
For pumps in the PHS150-xxxxL series, use pressure gauge AMT151, Ø100 mm display.
For PHS240-xxxxL and PHS280-xxxxL series pumps, AMT301 pressure gauge, Ø100 mm display is used.
For pumps of the PHS300-xxxxL series, pressure gauge AMT401, Ø100 mm display is used.
On this page you will find more information about REHOBOT pressure gauges. REHOBOT also offers hydraulic hand pumps in the PHS series without pressure gauge. We can also review requests for alternative design of the display. Contact REHOBOT for questions about this. If additional protection of the pump's pressure gauge is required, see Pressure gauge protection.
* PHS200-1000L, PHS200-2400L, PHS240-2400L, PHS240-4100L, PHS280-2400L and PHS300-1000L are designed for ultra-high pressures. All additional components and accessories must be designed for use with ultra-high pressures e.g. equipped with conical seals. The hydraulic pressure connection on PHS200-1000L, PHS200-2400L, PHS240-2400L, PHS240-4100L, PHS280-2400L and PHS300-1000L is a 9/16″- 18 UNF threaded port with 60° internal taper. The return connection has a G1/4″ internal thread.
Note:The hydraulic pressure and return connections on all other PHS pumps are two G1/4″ threaded connections.
Technical tips:When accessories are selected for a hydraulic system, their pressure range should be equal to or higher than the maximum working pressure of the pump unit. For hoses, we recommend sizing with a 3-4 times safety margin between the maximum working pressure of the hydraulic system and the burst pressure of the hose. It is also important to ensure that the effective oil volume of the pump exceeds the total oil volume in the hydraulic system, preferably with a safety margin of approximately 20%.
REHOBOT手动泵他常见型号：
REHOBOT PHS45016
REHOBOT PHS70-300
REHOBOT PHS70-300W
REHOBOT PHS70-300/LS201
REHOBOT PHS70-1000
REHOBOT PHS70-1000W
REHOBOT PHS70-1000/LS201
REHOBOT PHS70-1000/LS250
REHOBOT PHS70-1000/LS301
REHOBOT PHS70-2400
REHOBOT PHS70-2400W
REHOBOT PHS80-2400W
REHOBOT PHS80-4100
REHOBOT PHS100-1000
REHOBOT PHS100-1000W
REHOBOT PHS100-1000L
REHOBOT PHS100- 2400
REHOBOT PHS100-2400W
REHOBOT PHS100-4100
REHOBOT pump NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于REHOBOT手动泵PHS45016的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。
If you have any question for REHOBOT products, please feel free to dial 0086-21-3100 6702/ send request eAADail to sales@ize-industries.coAAD / browse our website: .
REHOBOT手动泵PHS系列PHS45016产品介绍
